Revision 28553 trunk/extensions/extGraph/config/text_en.properties
text_en.properties | ||
---|---|---|
1 |
#text_en.properties |
|
2 |
angle=Angle |
|
1 | 3 |
Aplicar_tolerancia_de_snap=Apply snap tolerance |
2 | 4 |
Aplicar_un_CLEAN_sobre_la_capa_original=CLEAN the original layer |
3 |
Calcular_la_red_sobre_la_capa_original=Compute the net over the original layer |
|
4 |
center_on_flag=Center on flag |
|
5 |
Clean_de_lineas=Line clean |
|
6 |
Clear=Remove |
|
7 |
Clear_Barriers=Remove all barriers |
|
8 |
Clear_Flags=Remove all flags |
|
9 |
Clear_Routes=Remove all routes |
|
10 |
Conversion_de_datos=Data conversion |
|
11 |
create_topology=Create topology |
|
12 |
de=of |
|
13 |
Defines_a_dot_density_symbol_based_on_a_field_value=Defines a dot density symbol based on a value of a given field |
|
14 |
Error_ejecucion=Execution error |
|
15 |
Error_entrada_datos=Data entry error |
|
16 |
Error_entrada_datos=Data entry error |
|
17 |
Error_escritura_resultados=Error writing results |
|
18 |
Error_fallo_geoproceso=Error in geoprocess execution |
|
19 |
Error_preparar_escritura_resultados=Error preparing writing of results |
|
20 |
Error_seleccionar_resultado=You must select a result file layer |
|
21 |
Especifique_fichero_shp_resultante=Specify a resulting Shape file |
|
22 |
Fichero_para_capa_corregida=File for corrected layer |
|
23 |
Generar_Red==Generate topology network |
|
24 |
Limpiando_lineas=Cleaning lines |
|
25 |
LineClean=Topology errors correction in lineal vectorial layer. |
|
26 |
LineClean._Progress_Message=Cleaning topology of layer... |
|
27 |
Generando_red_a_partir_de_capa_lineal=Create network from layer of lines |
|
28 |
Procesando_linea=Building network |
|
29 |
Ruta_borrada_o_inexistente=Route deleted or inexisting |
|
30 |
Ruta_no_encontrada=Route not found |
|
31 |
Seleccionar_capa_con_puntos_de_parada=Creating flags from a point layer |
|
32 |
Seleccione_una_capa_de_puntos_para_crear_paradas=Choose a point layer whose features will be converted in flags |
|
33 |
Seleccione_un_formato_para_guardar_la_ruta=Choose a format to save the lastest route. |
|
34 |
Seleccione_un_formato_para_guardar_los_flags=Choose a format to save flags. |
|
35 |
Trabajar_con_las_coordenadas_originales=Work with original coordinates |
|
36 |
angle=Angle |
|
37 | 5 |
based_upon_the_road_type=Based upon the road type |
6 |
Calcular_la_red_sobre_la_capa_original=Compute the net over the original layer |
|
38 | 7 |
cannot_apply_to_a_non_polygon_layer=Cannot apply to a non polygon layer |
8 |
center_on_flag=Center on flag |
|
39 | 9 |
change=Change |
40 | 10 |
character_marker=Character marker |
41 | 11 |
character_marker_symbol=Character marker |
42 | 12 |
choose_marker=Choose marker |
43 |
closest_facility=Closest facility |
|
44 |
closest_facility_instructions=Instructions |
|
45 |
closest_facility_solution=Solution |
|
46 |
closest_facility_solve=<html><b>Solve</b></html> |
|
13 |
Clean_de_lineas=Line clean |
|
14 |
Clean_Test=Clean test |
|
15 |
Clear=delete |
|
16 |
Clear_Barriers=Quit all barriers |
|
17 |
Clear_Flags=Quit all stops |
|
18 |
Clear_Routes=Remove all routes |
|
19 |
col_arc_type=Arc Type |
|
20 |
col_km_per_hour=km/hour |
|
47 | 21 |
color=Color |
48 |
confirmation_overwrite=Confirmation
|
|
22 |
Conversion_de_datos=Data conversion
|
|
49 | 23 |
cost=Cost |
50 |
cost_facility_units=<units> |
|
51 | 24 |
cost_field=Cost field |
52 |
cost_field_text=<html>Explicaci\u00F3n cost</html>
|
|
53 |
cost_from_a_table_field=Compute cost from a table\u0092s field
|
|
25 |
cost_field_text=<html>Cost Explication</html>
|
|
26 |
cost_from_a_table_field=Compute cost from a table\u00B4s field
|
|
54 | 27 |
cost_units=Cost units |
55 |
cost_units_text=<html>Explicaci\u00F3n cost units</html>
|
|
56 |
could_not_find_symbol_directory=Unable to locate the symbol\u0092s library\u0092s source folder
|
|
28 |
cost_units_text=<html>cost units</html> |
|
29 |
could_not_find_symbol_directory=Unable to locate the symbols library source folder
|
|
57 | 30 |
could_not_setup_legend=Could not setup legend. Please check values. |
58 |
Create_Network=Create topology network |
|
59 | 31 |
create_network=Create Network |
32 |
Create_Network=Generate net topology |
|
60 | 33 |
criterium=Criterium |
34 |
de=of |
|
35 |
Defines_a_dot_density_symbol_based_on_a_field_value=Defines a dot density symbol based on a value of a given field |
|
61 | 36 |
densities=Densities |
62 |
digitized_direction=Same digitized direction |
|
63 |
digitizedDirection=Digitized direction: |
|
64 |
doesnt_exist=doesn't exist |
|
65 | 37 |
done=Done |
66 | 38 |
dot_density=Dot density |
67 | 39 |
dot_size=Dot size |
68 | 40 |
dot_value=Dot value |
69 |
draw_route=Draw the route |
|
70 | 41 |
enable=Enable |
71 |
error_message=Error |
|
72 |
event=Event |
|
73 |
events=Events |
|
74 |
facilities=Facilities |
|
75 |
facilities_loaded_in=Facilities loaded in |
|
76 |
facility=Facility |
|
42 |
Error_ejecucion=Execution error |
|
43 |
Error_entrada_datos=Data entry error |
|
44 |
Error_escritura_resultados=Error writing results |
|
45 |
Error_fallo_geoproceso=Error in geoprocess execution |
|
46 |
Error_preparar_escritura_resultados=Error preparing writing of results |
|
47 |
Error_seleccionar_resultado=You must select a result layer file |
|
48 |
Especifique_fichero_shp_resultante=Specify a resulting Shape file |
|
49 |
explanation_sense_field=<html>1-> As digitized<br>2->inverse<br>3-> It will circle in the 2 courses</html> |
|
77 | 50 |
feet=Feet |
51 |
Fichero_para_capa_corregida=File for corrected layer |
|
78 | 52 |
field_configuration=Field configuration |
79 | 53 |
fill_color=Fill color |
80 |
fill_color=Fill color |
|
81 | 54 |
fill_properties=Fill properties |
82 | 55 |
flag_amount=Flag amount |
56 |
Generando_red_a_partir_de_capa_lineal=Create network from layer of lines |
|
57 |
Generar_Red=\=Generate net topology |
|
58 |
generate_report=See the route information |
|
83 | 59 |
grid=Grid |
84 | 60 |
high=High |
85 | 61 |
hours=Hours |
86 | 62 |
inches=Inches |
87 | 63 |
invalid_layer=Invalid layer |
88 |
la_capa_no_tiene_red_asociada= |
|
64 |
la_capa_no_tiene_red_asociada=The layer has no association to the net
|
|
89 | 65 |
labelling_field=Labelling field |
66 |
layer=Layer |
|
90 | 67 |
layers=Layers |
91 |
length_field_text=<html>Explicaci\u00F3n campo longitud</html> |
|
68 |
length_field_text=<html>Length field text</html> |
|
69 |
Limpiando_lineas=Cleaning lines |
|
92 | 70 |
line_symbols=Line Symbols |
93 |
Load_Network=Load Network
|
|
94 |
Load_Red=Load default network
|
|
95 |
Load_Network_From_File=Load network from file...
|
|
96 |
load_events=Load events
|
|
71 |
LineClean=Topology errors correction in lineal vectorial layer.
|
|
72 |
LineClean._Progress_Message=Cleaning topology of layer...
|
|
73 |
Load_Network=Load topology from previous generated net
|
|
74 |
Load_Red=Load data from previous calculated topology
|
|
97 | 75 |
load_stages=Load stages |
98 |
loading_facilities=Loading facilities |
|
99 | 76 |
low=Low |
100 |
Manage_Flags=Manage Flags (and Velocities)
|
|
77 |
Manage_Flags=Manage flags
|
|
101 | 78 |
marker_fill=Marker fill |
102 |
max_cost_limit=<html><p>Maximum limit</p><p align=\"center\">of cost:</p></html> |
|
103 |
max_facilities_number_higher_zero=The maximum number of facilities must be higher than zero |
|
104 | 79 |
medium=Medium |
105 | 80 |
meters=Meters |
106 | 81 |
miles=Miles |
107 | 82 |
millimeters=Millimeters |
108 | 83 |
minutes=Minutes |
109 | 84 |
monetary=Monetary |
85 |
msg_set_velocities=Please, set speeds for each type of arc (km / hour) |
|
110 | 86 |
nautic_miles=Nautic miles |
111 | 87 |
net_analyst=Net Analyst |
112 | 88 |
Network=Network |
113 | 89 |
new_flag=New flag |
114 |
no_events_network=There is no events in the network |
|
115 |
no_event_selected=There is no a selected event |
|
116 |
no_facilities_layer_selected=There is no a facilities layer selected |
|
117 |
no_network_layer=Network layer not found |
|
118 |
number_of_facilities_to_search=<html><p>Number of facilities</p><p align=\"center\">to search:</p></html> |
|
90 |
no_se_puede_pasar_por_todas_las_paradas=Not possible to pass all the stops |
|
119 | 91 |
offset=Offset |
120 |
only_points_in_file=The file should contain only points |
|
121 |
only_use_the_selected_points=<html><p>Only use the</p><p>selected points</p></html> |
|
122 | 92 |
options=Options |
123 |
out_of_the_network=out of the network |
|
124 | 93 |
outline=Outline |
125 | 94 |
outline_color=Outline color |
126 | 95 |
outline_width=Outline width |
127 |
overwrite_selected_file_confirmation=Selected file already exists. Do you want to overwrite it?
|
|
96 |
piloto_de_redes=Network pilot
|
|
128 | 97 |
point_symbols=Point symbols |
129 | 98 |
polygon_symbols=Polygon symbols |
130 | 99 |
preview=Preview |
100 |
Procesando_linea=Building network |
|
131 | 101 |
properties=Properties |
102 |
put_barrier=Put barrier |
|
103 |
put_flag_on_arc=Put flag on a section |
|
104 |
put_flag_on_node=Put flag on a node |
|
132 | 105 |
random=Random |
133 |
rejected_facility_out_of_network=rejected facility cause it is out of network |
|
134 |
rejected_facilities_out_of_network=rejected facilities cause they are out of network |
|
135 |
remove_event=Remove event |
|
136 | 106 |
reset=Reset |
137 |
reverseDigitizedDirection=Reverse digitized direction: |
|
138 | 107 |
route_control_panel=Route control panel |
139 |
route_from_the_event=<html><p>Route from</p><p>the event</p></html>
|
|
140 |
route_to_the_event=<html>Route to</p><p>the event</html>
|
|
108 |
Ruta_borrada_o_inexistente=Route deleted or inexisting
|
|
109 |
Ruta_no_encontrada=Route not found
|
|
141 | 110 |
save=Save |
142 | 111 |
save_error=Error saving |
143 |
save_events=Save events |
|
144 |
save_net_file_in=Save .net file: |
|
145 | 112 |
save_route=Save route |
146 | 113 |
save_stages=Save stages |
147 | 114 |
seconds=Seconds |
115 |
Seleccionar_capa_con_puntos_de_parada=Creating flags from a point layer |
|
116 |
Seleccione_un_formato_para_guardar_la_ruta=Choose a format to save the lastest route. |
|
117 |
Seleccione_un_formato_para_guardar_los_flags=Choose a format to save flags. |
|
118 |
Seleccione_una_capa_de_puntos_para_crear_paradas=Choose a point layer whose features will be converted in flags |
|
148 | 119 |
select_length_field=Select length field |
149 |
select_route_show_instructions=Select a route to show its instructions |
|
150 |
select_route_to_draw=Select the route to be drawn in the map |
|
151 |
select_route_to_zoom=Select a route to zoom it |
|
152 | 120 |
select_sense_field=Select sense field |
153 |
select_street_route_field_name= |
|
121 |
select_street_route_field_name=Select field for the route information (name of street that will be passed)
|
|
154 | 122 |
select_type_field=Select type field |
155 |
sense_field_text=<html>For example: FT -> same as digitized direction, TF-> reverse</html>
|
|
123 |
sense_field_text=<html>sense text field</html>
|
|
156 | 124 |
separation=Separation |
125 |
set_velocities=Set speeds |
|
157 | 126 |
shape_type_not_yet_supported=Shape type not yet supported |
158 | 127 |
Shortest_Path=Shortest path |
159 |
shortest_path_not_found=Shortest path not found
|
|
160 |
shp_files=SHP files
|
|
128 |
shortest_path_not_found=No route could be found
|
|
129 |
shortestpath=Shortest path
|
|
161 | 130 |
simple_fill=Simple fill |
162 | 131 |
size=Size |
132 |
solucion_no_valida=solution is not valid |
|
163 | 133 |
stage=Stage |
164 | 134 |
symbol_library=Symbol library |
165 | 135 |
symbol_property_editor=Symbol property editor |
166 | 136 |
symbol_selector=Symbol selector |
167 |
table_events_column_description=Description |
|
168 |
table_solution_column_cost=Cost |
|
169 |
table_solution_column_description=Description |
|
170 |
table_solution_column_facilities_position=Facility position |
|
171 |
the_file=The file |
|
172 |
tolerance=Tolerance |
|
137 |
Topology_Test=topology test |
|
173 | 138 |
total_route_cost=Total route cost |
139 |
Trabajar_con_las_coordenadas_originales=Work with original coordinates |
|
140 |
Triangulation_Test=Triangulation test |
|
174 | 141 |
trying_to_add_a_non_TypeSymbolEditor_panel=Attempting to add a non TypeSymbolEditor panel |
175 | 142 |
two_panels_with_the_same_name=Two panels with the same name |
176 | 143 |
type=Type |
177 |
type_field_text=type text field
|
|
144 |
type_field_text=<html>type text field</html>
|
|
178 | 145 |
units=Units |
179 |
unit_factor=Unit factor |
|
180 | 146 |
unknown_longitude_units=Unknown longitude units |
181 | 147 |
unknown_time_units=Unknown time units |
182 | 148 |
unknown_units=Unkown units |
183 | 149 |
use_line_length=Use line length |
184 | 150 |
use_symbol=Use symbol |
185 |
warning_message=Warning |
|
186 | 151 |
width=Width |
187 | 152 |
yards=Yards |
188 |
zoom_route=Zoom the route |
|
189 |
piloto_de_redes=network analyst |
|
190 |
msg_set_velocities=Please, set speeds for each type of arc (Km / hour) |
|
191 |
col_arc_type=Arc Type |
|
192 |
col_km_per_hour=Km/hour |
|
193 |
set_velocities=Set speeds |
|
194 |
Service_Area=Service Area |
|
195 |
Closest_Facility=Closest Facility |
|
196 |
ODMatrix=Origin-Destination Matrix |
|
197 |
Minimum_spanning_tree=Minimum Spanning Tree |
|
198 |
Create_TIN=Create TIN |
|
199 |
|
Also available in: Unified diff