#Translations for language [en]
#2011/03/29 17:05:03.288 GMT+2
(escala_maxima)=(Maximum scale)
(escala_minima)=(Minimum scale)
0=0
1=1
10_paginas_delante=Back 10
1\:=1
2X=2X
4X=4X
A0=A0
A1=A1
A2=A2
A3=A3
A4=A4
A5=A5
A6=A6
ADJACENT_POLYGON_TOOL_NAME=Digitize adjacent polygon
ADVANCED_AFFINE_TRANSFORM=Affine transformation with constraints
AFFINE_TRANSFORM=Affine transformation
ARC=ARC
AREA=Area
AWT=Yes
Abrir=Choose
Abrir_Geoproceso=Open Geoprocess
Abrir_Imagen=Open image
Abrir_una_capa=Open layer
Ac_north=Activate
Accept=Ok
Accion_Predefinida=Predefined action
Acciones=Actions
Acciones_muestra_atributos=Attribute table shortcut
Accumulated_distance=Accumulated distance
Aceptar=Accept
Acres=Acres
Action=Action
Actions=Actions
Activar_WOW=Enable Phillips WOW display
Activar_intervalo=Activate interval
Activar_profundidad_maxima=Activate maximum depth
Active=Active
Active_north=Always to North
Activo=Active
AddLyrDeleteErrors_WARNING=Adding a layer to a topology with errors will trigger another validation.\nContinue?
Add_Lyr=Add layer
Add_Rule=Add...
Add_VError=Add error vector
Add_Vector=Add
Add_action=Add action
Add_geometric_information_to_layer_process=Add geometric information to layer
Added_buffer_areas_to_TOC=Added layer with buffer zones to TOC.
Added_layer_with_influence_areas_to_TOC=Added layer with buffer zones to TOC.
Advanced_Hyperlink=Advanced hyperlink
Agregacion=Aggregation
Agregacion_Desc=Geoprocesses that transform detailed data in resumed data.
Agudeza=Sharpness
Aitoff=Aitoff
Ajustar_cobertura_wcs=WCS coverage settings
Ajustar_transparencia=Adjust transparency
Al_leer_la_leyenda=Reading legend
Albers_Conic_Equal_Area=Albers Conic Equal Area
All_supported_files=All supported files
Altura_en_metros=Height in meters
Altura_fija=Fixed Height
Altura_fija_de_texto=Fixed text height
An_exception_happened=An exception (fatal error) occurred.
Anadir=Add
Anadir\ capa\ de\ eventos=Add event layer
Anadir_Capa=Add layer...
Anadir_al_conjunto=Add to set
Anadir_capa=Add layer...
Anadir_capa_de_eventos=Add points from table...
Anadir_tema_de_eventos=Add event layer
Anadir_todos=Add all
Anaglyphic=Anaglyphic
Analisis=Analisis
Analisis_Desc=Geoprocesses that make explicit information from data
Ancho_Contorno=Outline width
Ancho_de_linea=Line width
Animacion=Animation
Annotation_layer=Annotation layer
Annotation_layer_not_valid=Annotation layer not valid
Annotation_layers=Annotation layers
Annotations=Annotations
Anterior=Back
Antialiasing=Antialiasing
Aplicar=Apply
Aplicar_tolerancia_de_dangles=Apply dangling lines tolerance.
Aplicar_tolerancia_de_snap=Apply fuzzi tolerance.
Aplicar_un_CLEAN_sobre_la_capa_original=Clean layer topology first
Apply=Apply
Archivo=File
Archivos_de_Disco=Disc files
Area=Area
Area_de_influencia=Buffer
Area_de_influencia_definida_por_un_campo=Buffer defined by field
Area_de_influencia_definida_por_una_distancia=Buffer defined by distance
Areas=Areas
Areas_de_influencia=Buffer
Areas_de_influencia._Introduccion_de_datos=Buffer. Data input
Arrival_to=Arrive at
Ascending=Ascending
Asistente_de_geoprocesamiento=Geoprocessing Wizard
Associated_layer=Assoc. layer
At_the_bottom=At the bottom
Atributo=Attribute
Atributos_Numericos=Numerical attributes
Ayuda=Help
Azimut_Navigation=Incline
Azimuthal_Equidistant=Azimuthal equidistant
A\u00f1adir_al_TOC_geometrias_erroneas=Add to TOC geometry errors.
BATCH_FIX=Batch fix
BATCH_FIXING=Batch fixing topological errors
BEZIER=Bezier
BRX=Right X
BRY=Right Y
BURSA_WOLF_TRANSFORM=Bursa-Wolf transformation
B_SPLINE=B-spline
Back=Previous
Background_Color=Background colour\:
Bajar_capa=Move layer down
Band_Value=Band value
Bin_width_12=
Bin_width_12=
Bin_width_12.5_metres=Bin width 12.5 metres
Bin_width_165_US_survey_feet=Bin width 165 US survey feet
Bin_width_25_metres=Bin width 25 metres
Bin_width_3=
Bin_width_3=
Bin_width_3.125_metres=Bin width 3.125 metres
Bin_width_330_US_survey_feet=Bin width 330 US survey feet
Bin_width_37=
Bin_width_37=
Bin_width_37.5_metres=Bin width 37.5 metres
Bin_width_6=
Bin_width_6=
Bin_width_6.25_metres=Bin width 6.25 metres
Bin_width_6.25_metresBin=width 6.25 metres
Bin_width_6.25_metresBin=width 6.25 metres
Bin_width_82=
Bin_width_82=
Bin_width_82.5_US_survey_feet=Bin width 82.5 US survey feet
Block_Size_=Block Size\:
Bold=Bold
Bonne=Bonne
Both=Both
Brightness=Brightness
British_chain_(Benoit_1895_A)=British chains (Benoit 1895 A)
British_chain_(Benoit_1895_B)=British chains (Benoit 1895 B)
British_chain_(Sears_1922)=British chains (Sears 1922)
British_chain_(Sears_1922_truncated)=British chains (Sears 1922 truncated)
British_foot_(1865)=British feet (1865)
British_foot_(1936)=British feet (1936)
British_foot_(Benoit_1895_A)=British feet (Benoit 1895 A)
British_foot_(Benoit_1895_B)=British feet (Benoit 1895 B)
British_foot_(Sears_1922)=British feet (Sears 1922)
British_foot_(Sears_1922_truncated)=British feet (Sears 1922 truncated)
British_link_(Benoit_1895_A)=British links (Benoit 1895 A)
British_link_(Benoit_1895_B)=British links (Benoit 1895 B)
British_link_(Sears_1922)=British links (Sears 1922)
British_link_(Sears_1922_truncated)=British links (Sears 1922 truncated)
British_yard_(Benoit_1895_A)=British yards (Benoit 1895 A)
British_yard_(Benoit_1895_B)=British yards (Benoit 1895 B)
British_yard_(Sears_1922)=British yards (Sears 1922)
British_yard_(Sears_1922_truncated)=British yards (Sears 1922 truncated)
Buffer_cap=Buffer cap
Buffer_information=Buffer information
Buffer_width=Buffer width
Build=Build polygons
Build_de_poligonos=Build polygons from lines
CARDINAL_SPLINE=Cardinal spline
CATMULLROM_SPLINE=Catmull-Rom spline
CIRCLE=CIRCLE
COMP=COMP
COMPLETE_UNDERSHOOT_FIX=Finalize line
COMPUTE_CLEAN=Clean topology
COUNT=COUNT
CREATE_FEATURE_OVERLAP_AREA_FIX=Create new polygon from area of overlap
CREATE_NEW_FEATURE_FOR_GAPS=Create new polygon to cover gap
CSVStringDriver=CSV format parser
CUBIC_BSPLINE=Cubic B-spline
CURVE_TYPE=Curve type\:
Calcular_Thiessen=Voronoi (Thiessen) polygons
Calcular_Tin=Delaunay triangulation
Calcular_intervalos=Compute intervals
Calcular_la_red_sobre_la_capa_original=Use original layer data
Calculate=Calculate
Calculate_Service_Areas=Calculate Service Areas
Cambio_Color=Change colour
Cambio_Estilo=Change style
Cambio_de_estilo=Change style
Cambios_de_estilo=Style changes
Campo=Field
Campo_clasifica=Classification field
Campo_de_clasificacion=Classification field
Campo_de_etiquetado=Field with label text
Campo_para_disolver=Field to dissolve
Campos=Fields
Cancel=Cancel
Cancelar=Cancel
Cant_process_this_layer=Cannot process this layer.
Capa=Layer
Capa_Raster=Raster Layer
Capa_Vectorial=Vectorial layer
Capas=Layers
Capas_A_A\u00f1adir_A_La_Topologia=Layers to add to the topology
Capas_del_directorio=Layers on directory
Capas_del_localizador=Locator layers
Cascada=Cascade
Cassini_Soldner=Cassini Soldner
Catalog=Catalog
Catalogo=Geodata online search tools
Centimetros=Centimetres
Central_meridian=Central meridian
Centrar_la_Vista_sobre_un_punto=Center view to point
Cerrar=Close
Check_Text=Frame visualization
Chew_Incremental_TIN_based_in_a_bounding_triangle=Chew's incremental constrained triangulation
Choose_target_file_DBF=Choose target file (.DBF)
CircleCADTool=
CircleCADTool=
CircleCADTool.3p=3P
Circulo=Circle
Circumference=Circumference
Clarke's_chain=Clarke's chains
Clarke's_foot=Clarke's feet
Clarke's_link=Clarke's links
Clarke's_yard=Clarke's yards
Clean=Clean
Clean_Test=Clean
Clean_de_lineas=Automatic correction of topological errors
Clean_selection=Clear selection
Clear=Delete
Clear_Barriers=Delete all barriers
Clear_Flags=Delete all stops
Clear_Routes=Delete all routes
Close=Close
Close_multiline=Close polylines
Closest_Facility=Closest facility...
Cobertura_de_datos=Data cover
Cobertura_de_entrada=Input cover
Cobertura_de_interseccion=Intersect cover
Cobertura_de_recorte=Clip cover
Cobertura_de_salida=Output cover
Cobertura_para_unir=Union cover
Coberturas=Coverages
Coberturas_de_entrada=Input cover set
Color_Contorno=Color outline
Color_de_Relleno=Fill color\:
Color_de_la_Linea=Line color
Color_final=Last colour\:
Color_inicial=Initial color\:
Color_inicio=First colour\:
Commentaries=Description\:
Compare=Compare
ComplexSelectionCADTool.crosscircle=CC
ComplexSelectionCADTool.crosspolygon=CP
ComplexSelectionCADTool.end=E
ComplexSelectionCADTool.introcircle=IC
ComplexSelectionCADTool.intropolygon=IP
ComplexSelectionCADTool.outcircle=OC
ComplexSelectionCADTool.outpolygon=OP
ComplexSelectionCADTool.outrectangle=OR
Compression_=Compression\:
Compute_Build=Convert to polygon layer
Compute_Clean=Clean topology
Concordancia=Match
Configurar=Configure
Configurar_localizador=Configure locator...
Connectivity=Connectivity
Consola=Console
Consola_de_jython=Jython Console
Consola_de_jython_tooltip=Opens a jython console
Contengan=contain
Contrast=Contrast
Control_points=Control points
Control_points_coordinates_dimension_are_insufficient_for_the_current_transform=This transformation requires control points of a higher coordinates dimension.
Control_points_have_inconsistent_reference_system=Control points have inconsistent reference system.
Conversion_de_datos=Data conversion
Conversion_de_datos_Desc=Geoprocesses that transform data (format conversion, reproject, etc.)
Convex_Hull=Convex Hull
Convex_Hull._Introduccion_de_datos=Convex Hull. Data input
Coordinates=Coordinates
Coordinates_of_the_centre=Center coordinates
Couldnt_find_column=Couldn't find the column
Craster_Parabolic=Craster Parabolic
Crear_Buffer=Create Buffer...
Crear_Indice=Spatial index creation...
Crear_Indice_Intro=Spatial indexes could optimize spatial querys.
Crear_Indice_Pregunta_1=Do you want to create an spatial index for layer
Crear_Indice_Pregunta_2=?
Crear_capa_osg=Create new OSG Layer
Create_Network=Generate topology...
Create_Open_layer=Create/Open layer
Create_TIN=Create TIN (Delaunay)
Create_Topology=Create topology
Creating_layer_with_buffers=Creating layer with areas of influence
Creating_layer_with_influence_areas=Creating layer with areas of influence...
Creating_temp_file=Creating temporary file...
Creation_Date=Creation date\:
Creation_derivative_geometry_layer_process=Create a new layer with derived geometries.
Crucen_con=cross over
Cruz=Cross
Cuadrado=Square
Cylindrical_Equal_Area=Cylindrical Equal Area
DBF=DBF
DBF_files=DBF files
DBManager=DataBase Manager
DELETE_FIX=Delete feature
DGNFiles=DGNFiles
Dado_un_campo_de_atributos=Given an attribute field for classification
Dat_CodeCrs=Code
Dat_Datum=Name of datum\:
Dat_DefinirPor=Define for\:
Dat_Elips=Name of ellipsoid\:
Dat_Importar=Import
Dat_InvF=Inverse flattening
Dat_InvFToolTipText=The inverse flattening parameter is used to specify the shape of the spheroid
Dat_Long=Longitude\:
Dat_Meridian=Name of meridian\:
Dat_NombreCrs=Name
Dat_SemMay=Semi-major axis
Dat_SemMayToolTipText=The semi-major axis defines the size of the ellipsoid in south to north direction
Dat_SemMen=Semi-minor axis
Dat_SemMenToolTipText=The semi-major axis defines the size of the ellipsoid in west to east direction
Dat_nDatum=Datum
Dat_nElipsoide=Ellipsoid
Dat_nMeridian=Meridian
Data_source_not_initialized=Data source not initialized
Date=Date
De=of
Debe_seleccionar_un_\u00fanico_elemento=Please select a unique element.
Debe_seleccionar_una_capa_de_lineas_en_el_TOC=Please select a line vector layer from the TOC.
Decimetros=Decimetres
DefCrsUsr_Seleccionar_Crs=Select recently used SRS
DefCrsUsr_existente=From an existing SRS\:
DefCrsUsr_importar_wkt=Import WKT string
DefCrsUsr_nuevo=From user definitions
DefCrsUsr_wkt=From a WKT string\:
Default_Navigation=Default navigation
Default_order_manager=Default ordering manager\:
Define_the_labeling_expression_=Define the labeling expression
Defines_a_dot_density_symbol_based_on_a_field_value=Defines a dot density symbol based on the value of a field
Delete_VError=Delete
Dentro=inside de polygon
Dentro_y_fuera=Inside and outside de polygon
Derecha=Right
Derecho=Right
Derivative_geometries_control_panel_listener_removed=Removed derived geometries control panel listener.
Des_north=Disable
Descending=Descending
Descripcion=Description
Desea_a\u00f1adir_capa_con_geometrias_que_no_forman_parte_de_poligonos=Add layer with nodes and edges that are not part of a polygon?
Desea_a\u00f1adir_capa_con_pseudonodos=Add layer with detected pseudo nodes?
Desea_calcular_el_build_solo_con_las_polilineas_seleccionadas=Include only selected lines?
Desea_calcular_el_clean_solo_con_las_polilineas_seleccionadas=Include only selected lines?
Desplazamiento=Panning
Destination_layer_type=Target layer type
Detalles=Details
Devuelvo_el_foco_a_=Returns focus to
Diferencia=Difference
Diferencia_Introduccion_de_datos=Difference. Fill in data
Disolver=Dissolve
Disolver._Introduccion_de_datos=Dissolve. Data input
Disolver_entidades=Dissolve entities
Display=Visualization Properties
Distancia_dangle_incorrecta=Error. Invalid dangle tolerance value.
Distancia_interocular=Interocular distance
Distancia_pantalla=Distance to display
Distancia_snap_incorrecta=Error. Invalid fuzzi tolerance value.
Dont_close=Don't close
Dxffiles=AutoCAD Drawing Exchange Format (*.dxf)
ELLIPSE=ELLIPSE
EMPTY_STATUS=Empty topology.
EPSG=EPSG
ERROR=Error
ERRORS=Errors
ERROR_FIX_ERROR=Failed to apply correction.
ERROR_FIX_SUCCESS=Correction applied successfully.
ERROR_INSPECTOR_ALL_RULES=All rules
ERROR_INSPECTOR_TITLE=Review topological errors\:
ESRI=ESRI
EXCEPTIONS=Exclusions
EXTEND_DANGLE_FIX=Extrude dangling node to touch nearest geometry
EXTEND_DANGLE_TO_BOUNDARY_FIX=Snap dangling node to nearest boundary node
East=E
Eckert_I=Eckert I
Eckert_II=Eckert II
Eckert_III=Eckert III
Eckert_IV=Eckert IV
Eckert_V=Eckert V
Eckert_VI=Eckert VI
EditVertexCADTool.addvertex=A
EditVertexCADTool.delvertex=D
EditVertexCADTool.nextvertex=N
EditVertexCADTool.previousvertex=P
Editar_leyenda=Properties
Edition=Editing
Edition_Properties=Edit Properties
Ejecutando=comando\:=Execute command\:
Ejecutando\ comando=
Ejecutando\ comando\:=Execute=command\:
Ejecutando\ comando\:\=Execute command\:
Elegir_Color=Select colour
Elegir_Fuente=Select font
Elegir_pantalla=Choose display
Elementos_seleccionados_de_la_capa=... selected features in layer\:
Elevacion=Elevation
Elevation_layer_question=Use this layer as elevation layer(Yes/No)?
Elija_una_herramienta_de_analisis=Choose an analisys tool
Eliminar=Delete
En_metros=In meters
En_pixels=In pixels
Enable_hyperlink=Enable hyperlinks
Enable_layer_preview=Enable layer preview
Encoding=Character encoding
Encuadre=Zoom manager...
Encuadre_Vista=Panning
Enlace_espacial=Spatial join
Enlace_espacial._Introduccion_de_datos=Spatial join. Data input
Enlazar_a_documento_PDF=Link to PDF document
Enlazar_a_fichero_de_texto=Link to text files
Enlazar_a_ficheros_de_imagen=Link to image files
Enlazar_a_imagen_SVG=Link to SVG drawing
Equidistance_=EQUIDISTANCE
Equidistant_Conic=Equidistant Conic
Equirectangular=Equirectangular
Error=Error
Error\ creating\ table\ aliases=
Error\ reading\ layer\ fields=Error reading layer fields
Error_De_Acceso_Datos=Data access error.
Error_abriendo_el_fichero=Error opening file
Error_accediendo_a_los_datos=Data access error.
Error_al_calcular_RMS=Error computing RMS.
Error_atributo_no_numerico=Not numeric buffer field
Error_calculo_transformacion=Error computing transformation.
Error_capa_vacia=Result layer is empty.\nCheck for a possible error.
Error_cargando_links=Failed to load error vectors.
Error_chequeando_precondiciones=Check preconditions error
Error_chequeo_tipo_geometria=Error during checking geometry type
Error_computing_RMS=Error computing RMS.
Error_creating_annotation_layer=Error creating annotation layer
Error_creating_mathTransform=Error in transformation equation.
Error_creating_new_table=Error creating the new table
Error_distancia_buffer=You must enter a buffer distance
Error_ejecucion=Execution error
Error_entrada_datos=Data entry error
Error_escritura_resultados=Data writing error
Error_evaluationg_expression=Error evaluating expression.
Error_exportando_SLD=Error exporting SLD
Error_exportando_las_estadisticas=Error exporting statistics.
Error_fallo_geoproceso=Error during geoprocess execution
Error_getting_table_fields=Error obtaining table fields.
Error_guardando_la_leyenda=Error saving legend
Error_guardando_la_plantilla=Error saving template.
Error_in_Autocomplete_Polygon_Tool_=Error in Autocomplete Polygon tool
Error_loading_driver=Error loading driver
Error_offset_no_numerico=Error. Invalid offset values.
Error_opening_annotation_layer=Error opening annotation layer
Error_preparar_escritura_resultados=Error during preparation of result layer
Error_proyecciones_iguales=Error. Source and target projections are equals.
Error_reading_andami_config_New_file_created_A_backup_was_made_on_=Error reading andami-config.xml\: New file created. A backup was made on
Error_reading_from_the_driver=Error reading from driver.
Error_reading_isocodes_file=Error reading the isocodes file for languages
Error_reading_plugin_persinstence_New_file_created_A_backup_was_made_on_=Error reading plugin-persistence.xml. New file created. A backup was made on
Error_seleccionar_capas_merge=You must select the layers to merge.
Error_seleccionar_esquema_merge=Error choosing merge eschema
Error_seleccionar_gp=Must select a geoprocess in the tree
Error_seleccionar_gp_desc="You've selected a package.\nPackages are logic groups of geoprocesses. Expand the tree and select a geoprocess to launch it
Error_seleccionar_resultado=You must specify a result file
Error_spjoinmn_sin_funcion=In a 1-N spatial join you must specify sumarization functions
Error_summarizing_table=Error_summarizing_table
Error_updating_user_DB_Probably_it_is_locked_by_other_process=Error updating user DB. Probably it is locked by another process
Errors=Errors
Escala=Scale
Escala_Maxima=Maximum scale
Escala_Minima=Minimum scale
EscaladoX=ScaleX\:
EscaladoY=ScaleY\:
EscaladoZ=ScaleZ\:
Escoger_Fun_Resumen=<-
Especifique_fichero_shp_resultante=You will now be asked to specify a shapefile for \nstoring the cleaned network layer.
Este\ fichero\ no\ es\ posible\ abirlo\ como\n\ \ \ \ \ \ \ \ //\ capa\ de\ anotaciones=This file cannot be opened as an annotation layer.
Esten_contenidos_en=are contained in
Estilo=Style\:
Etiqueta=Label
Etiquetado=Labelling
Etiquetados=Labelling
Etiquetas_estandar=Standard labels
Evaluate_Topology=Validate topology
Examinar=Choose...
Examine=Examine
Excel=Excel
Exception=Excluded
Exception_adding_geometric_info=Error while adding the geometric info
Ext3D.latitude=LAT
Ext3D.longitude=LONG
Extension=Extension
Extent=Extent
Extrusion=Extrusion
FACTORY_EXCEPTION=Error creating transformation.
FEATURE_ID=FID
FFrameBasic=FFrameBasic
FFrameGraphics=FFrameGraphics
FFrameGrid=FFrameGrid
FFrameGroup=FFrameGroup
FFrameLegend=FFrameLegend
FFrameNorth=FFrameNorth
FFrameOverView=FFrameOverView
FFramePicture=FFramePicture
FFrameScaleBar=FFrameScaleBar
FFrameSymbol=FFrameSymbol
FFrameTable=FFrameTable
FFrameText=FFrameText
FFrameView=FFrameView
FIXING_ERROR=Fixing topological errors...
FMAPMUSTBECLOSED=All polygon geometries of A must be closed
Factor=Factor
Failed_adding_the_layer_to_TOC=Failed adding layer to view.
Failed_calculating_area_of_geometry=Failed calculating the area of geometry
Failed_calculating_geometry_points=Failed to calculate geometry points.
Failed_calculating_perimeter_of_geometry=Failed calculating the perimeter of geometry
Failed_canceling_the_current_task_of_creation_a_buffer_layer=Failed canceling the current task of creation a buffer layer
Failed_canceling_the_layer=Failed canceling the layer
Failed_creating_XML_document=Failed to create XML document.
Failed_creating_geometry=Failed to create geometry.
Failed_creating_the_new_layer=Failed to create the new layer.
Failed_creating_the_temporal_layer=Failed to create temporary layer.
Failed_creting_new_field=Failed creating the new field
Failed_doing_backup_of_project_to_be_overwritten=Failed to backup the project file to be overwritten.
Failed_filling_table=Failed filling the table
Failed_finishing_the_derivative_geometries_tool_in_layer=Failed to complete computation of derivative geometries for layer
Failed_getting_a_geometry_a_line_wont_be_created=Failed to retrieve geometry. Line will not be created.
Failed_getting_a_geometry_a_polygon_wont_be_created=Failed to retrieve geometry. Polygon will not be created.
Failed_getting_geometries=Failed getting geometries
Failed_getting_geometry=Failed to retrieve geometry.
Failed_getting_the_features_indexes=Failed to retrieve feature index.
Failed_initializing_the_backup_of_previous_project_to_be_overwritten_extension=Failed to initialize extension for backing up project files.
Failed_loading_features=Failed to load features.
Failed_loading_fields=Failed loading fields
Failed_loading_the_project=Failed loading the project
Failed_loding_quick_info_tool_data_selection_panel=Failed to load data selection panel for Quick Info tool.
Failed_pausing_the_process=Failed to pause processing.
Failed_processing_the_geometries=Failed to process geometries.
Failed_reloading_the_layer=Failed reloading the layer
Failed_restoring_active_layers=Failed restoring active layers
Failed_restoring_layer_fields_should_remove_and_add_the_layer_to_have_consistent_data=Failed restoring the fields of the layer,\n, you sould delete the layer and re-add it to TOC in order to get consistent data.
Failed_restoring_layer_in_edition_mode=Failed restoring the layer in editing mode
Failed_resuming_the_process=Failed to resume processing.
Failed_saving_active_layer_indexes=Failed saving active layer indexes
Failed_saving_the_layer=Failed saving the layer
Failed_selecting_geometries=Failed to select geometries.
Failed_selecting_geometries_by_circle_topology_exception_explanation=Failed to select geometries in layer.\nThe circular selection area intersects some faulty geometries. Please revise input data.
Failed_selecting_geometries_by_polyline_topology_exception_explanation=Failed to select geometries in layer.\nThe polygonal selection area intersects some faulty geometries. Please revise input data.
Failed_selecting_geometries_in_layer=Failed to select geometries from layer.
Failed_selecting_layer=Failed to select layer.
Failed_the_load=Failed to load.
Failed_the_process=The process failed
Failed_the_process_Shouldnt_work_with_the_layer=The process failed. You should not work with the layer
Failed_transforming_XML_to_String=Failed to transform XML to string.
Failed_unregistering_derivative_geometry_control_panel_listener=Failed to unregister control panel listener for Derivative Geometries Extension.
Failed_updating_features=Failed to update features.
Feature_1=Feature A
Feature_2=Feature B
Features=Features
Fichero=File
Fichero_para_capa_corregida=File for corrected layer
Ficheros_ADF=Arc/Info Binary Grid (*.adf)
Ficheros_DGN=MicroStation Design (*.dgn)
Ficheros_DWG=CAD Drawing (*.dwg)
Ficheros_ECW=ERMapper Compressed Wavelet (*.ecw)
Ficheros_ERS=ERMapper (*.ers)
Ficheros_EXP=Expression (*.exp)
Ficheros_GGR=Gimp Gradient
Ficheros_GIF=Graphics Interchange Format (*.gif)
Ficheros_GPL=Gimp Palette
Ficheros_GSB=Grid Shift Binary (*.gsb)
Ficheros_IMG=ERDAS IMAGINE (*.img)
Ficheros_KML=Keyhole Markup Language (*.kml)
Ficheros_LAN=ERDAS 7 (*.lan, *.gis)
Ficheros_MPL=ILWIS Raster Map (*.mpr, *.mpl)
Ficheros_NET=Network (*.net)
Ficheros_PGM=Netpbm Greyscale (*.pgm)
Ficheros_PIX=PCI Geomatics Database File (*.pix)
Ficheros_PPM=Netpbm RGB (*.ppm)
Ficheros_PROP=Properties (*.properties)
Ficheros_RAW=ERDAS IMAGINE Raw (*.raw)
Ficheros_RMF=Raster Metafile (*.rmf)
Ficheros_RST=IDRISI Raster (*.rst)
Ficheros_SHP=SHP Files
Ficheros_SID=MrSID (*.sid)
Ficheros_SVG=Scalable Vector Graphics (*.svg)
Ficheros_TFW=TIFF World File (*.tfw)
Ficheros_TIF=(Geo)TIFF (*.tif, *.tiff)
Ficheros_TREE=Decision Tree (*.tree)
Ficheros_TXT=Text (*.txt)
Ficheros_WLD=World File (*.wld)
Ficheros_XLS=Excel Spreadsheet (*.xls)
Ficheros_XML=Extensible Markup Language (*.xml)
Ficheros_csv=Comma Separated Values (*.csv)
Ficheros_dbf=DBase File (*.dbf)
Ficheros_de_cartografia=Layer files
FieldDecimalCount=Decimal precision count
FieldDefaultValue=Default value
FieldLength=Length
FieldName=Name
FieldType=Type
Field_already_exists__=Field already exists\:
Field_prefix_=Field prefix\:
Field_to_use_for_JOIN_=Field to join on\:
Field_with_From_ID=Field with FROM ID
Field_with_To_ID=Field with TO ID
Field_with_turn_cost=Field with turn cost
Fields=Fields
File=File
File_Format=Output file
File_exists_Do_you_want_to_overwrite_it=File already exists. Do you want to overwrite it?
File_exists_Do_you_want_to_overwrite_it?=File already exists. Do you want to overwrite it?
Finished_the_derivative_geometries_tool_in_layers=Derivative geometries tool has finished processing the layers.
First_point_coordinates=Coordinates of first point
Fix_parameters=Fix parameters
Fixed_position_counting_from_bottom=Fixed position counting from bottom
Fixed_position_counting_from_top=Fixed position counting from top
Flat=Planar
Flatness=Flatness
Flip_Lines=Flip lines
Flip_lines=Invert order of line nodes
Font=Font
Format_selection=Format selection
Formato=Format
Formato_de_numero_erroneo=Incorrect number format.
Fuente=Font
Fuera=Outside the polygon
FullScreen=Full screen
Funciones_Sumarizacion=Group by functions
GAPS=Gaps
GC=Computational Geometry
GC_Desc=Geoprocesses that make task related with computational geometry.
GEOMETRY_INFO=Feature geometry information
GEOS=GEOS
GEO_position=Geographic location
GL=No
GML=Geography Markup Language (GML)...
GROUP=GROUP
GT2_BOUNDING_TRIANGLE=Geotools 2 implementation of algorithm for incremental triangulation within bounding triangle.
GT2shp=GT2shp
Gall_Stereographic=Gall Stereographic
General=General
GeneralLabeling.sample_text=Sample text
GeneralLabeling.sample_text=
Generalitation=Generalize
Generalization=Generalization
Generando_red_a_partir_de_capa_lineal=Generating network from line layer...
Generando_topologia_de_poligonos=Generating polygon topology
Generar_Intervalos=Generate intervals
Generar_Red==Generate network topology
Generate=Create
Generate_Tfw_=Generate Tfw\:
Generate_line=Create line
Generate_polygon=Create polygon
Generated_File=Output file
GeoDB=GeoDB
GeoProcessing=Geoprocessing
GeoProcessing\ Manager=Geoprocessing manager
Geom_AREA=Geom_AREA
Geom_LENGTH=Geom_LENGTH
GeometryPropertyType=Geometry
Geometry_not_found_in_radius_search=No geometries found within search radius.
Geometry_types=Geometry types
Geometry_without_info=Geometry without information.
Geoprocesos=Geoprocesses
German_legal_metre=German legal metres
Gestor_de_Geoprocesos=Geoprocess toolbox
Gnomonic=Gnomonic
Gold_Coast_foot=Gold Coast feet
Goode=Goode
Grados=Degrees
Graficos=Graphics
Grid=Grid
Grid_settings=Grid settings
Grosor_de_linea=Line width
GroupByField_not_initialized=GroupByField not initialized
Group_with_layer=Group with layer
Guardar=Save
Guardar_el_zoom_actual=Save current zoom
Guardar_leyenda=Save legend
HTML_and_text_formats=Link to text and HTML files
Habilitar_etiquetado=Enable labelling
Hammer_Aitoff=Hammer Aitoff
HanegadasC=Hanegadas (Castilla)
HanegadasV=Hanegadas (Valencia)
HeadMounted=Head mounted display
Hectareas=Hectares
Height=Height
Heigth_Z=Z Value associated to the layer
Heigth_layer_question=Vector height (in meters)
Herramienta_georeferenciacion=Georeferencing tool
Herramientas=Tools
Herramientas_Mapa=Layout tools
Herramientas_SEXTANTE=SEXTANTE GIS processing tools
Herramientas_Tabla=Table tools
Herramientas_de_analisis=Analisys Tools
Herramientas_localizador=Additional data view navigation tools
Herramientas_vista=View tools
Hight=Height\:
Hiperenlace=Hyperlink
Historial=Command line history
HorizontalInterlace=Horizontal interlaced
HorizontalSplit=Horizontal Split
Hotine_Oblique_Mercator_Two_Point_Center=Hotine-Oblique Mercator Two Points
Hyperlink=Hyperlink
Hyperlink_Settings=Hyperlink settings
Hyperlink__field_value_is_not_valid_file=Hyperlink field value is not valid file
Hyperlink_linked_field_doesnot_exist=Hyperlink linked field does not exist
Hyperlink_settings=Hyperlink settings
I18nPreferencePage.Activar=Active
I18nPreferencePage.Desinstalar=Uninstall
I18nPreferencePage.Desinstalar_idioma_tooltip=Uninstall a gvSIG locale
I18nPreferencePage.Idioma=Language
I18nPreferencePage.Instalar=Install
I18nPreferencePage.Instalar_idioma_tooltip=Install a new locale or update an existing one
I18nPreferencePage.Locale_code=Locale code
I18nPreferencePage.Pais=Country
I18nPreferencePage.Variante=Variant
I18nPreferencePage.al_archivo=to the file\:
I18nPreferencePage.archivos_jar=.zip and .jar files
I18nPreferencePage.ayuda=If you change the active locale, it won't be used until the app is restarted
I18nPreferencePage.changes_will_be_applied_when_restarting_the_application=Changes will be applied when restarting the application.
I18nPreferencePage.colaboracion=If you would like to help with the translation of gvSIG, put in contact with us through the email address\: i18n_management@lists.gvsig.org
I18nPreferencePage.confirmar_desinstalar_idioma=Confirm de locale uninstall
I18nPreferencePage.en_archivo=in the file\:
I18nPreferencePage.error_actualizar_idioma=Error while updating a locale
I18nPreferencePage.error_desinstalar_idioma=Error while uninstalling a locale
I18nPreferencePage.error_instalar_idiomas=Error installing locales
I18nPreferencePage.exportado_textos_idioma=The texts of the selected locales have been exported
I18nPreferencePage.exportar_actualizar=Update
I18nPreferencePage.exportar_actualizar_tooltip=Export the selected locale to complete or update it
I18nPreferencePage.exportar_idioma=Export a locale
I18nPreferencePage.exportar_traducir=Translate
I18nPreferencePage.exportar_traducir_tooltip=Export the selected locale to be translated to a new locale
I18nPreferencePage.idioma_actual_no_puede_desinstalar=The current locale can't be uninstalled
I18nPreferencePage.idioma_preparado_traducir=The locale has been prepared to be translated
I18nPreferencePage.idiomas_instalados=Have been installed or updated the locales\:
I18nPreferencePage.idiomas_no_encontrados_para_instalar=Unable to find a locale to install or update.
Check the imported ZIP file contains a locales.csv file and, at least,
a .properties file with the texts for the language to import
I18nPreferencePage.instalar_idiomas=Install locales
I18nPreferencePage.seguro_desea_desinstalar_idioma=Are you sure you want to delete the selected locale\:
I18nPreferencePage.seleccione_idioma=Select a locale to update
I18nPreferencePage.seleccione_idioma_actualizar=Select a locale to update
I18nPreferencePage.seleccione_idioma_desinstalar=Select a locale to uninstall
I18nPreferencePage.seleccione_idioma_referencia=Select a locale to use for reference
I18nPreferencePage.seleccione_idioma_traducir=Select the locale to translate to
IAU2000=IAU2000
ID=ID
INCORRECT_VERROR_LINKS=Invalid error vectors layer.
INFO=Info
Icon_not_found_=Icon not found
Identificar_Resultados=Query results
Igual_que_la_impresora=Same as printer
Image=Image
Image_format=Link to image files
Imagen=Image
Implimir=Print...
Importar=Import
Importar_Objeto_3D=Import 3D Object
Importar_Objeto_3D_Vectorial=Import 3D vectorial Object
Impossible_convert_to_polygon=Cannot convert to polygon.
Impossible_convert_to_polygon_the_geometry=Cannot convert geometry to polygon.
Impossible_convert_to_polyline=Cannot convert to polyline.
Imprimir=Print...
Incompatible_data_type_in_column_wont_modify_that_column=Incompatible data type, the column won't be modified
Incompatible_projection=Incompatible projection.
Increm_distancia_fusion=Increase fusion distance
Incremental_DT_based_in_a_rectangular_bounding_box=Incremental TIN based on bounding triangle.
Indexando=Indexing...
Indexando_espacialmente=Generating spatial index for layer...
Indian_foot=Indian feet
Indian_foot_(1937)=Indian feet (1937)
Indian_foot_(1962)=Indian feet (1962)
Indian_foot_(1975)=Indian feet (1975)
Indian_yard=Indian yards
Indian_yard_(1937)=Indian yards (1937)
Indian_yard_(1962)=Indian yards (1962)
Indian_yard_(1975)=Indian yards (1975)
Inferior=Lower
Informacion=Information
Information=Information
Inicializando=Initializing...
Initializing_configuration_quick_info_tool=Initializing setup for Quick Info tool...
Insertar=Insert
Inside=Inside
Interleave_=Interleave\:
InternalPolygonCADTool.end=E
Interseccion=Intersect
Interseccion._Introduccion_de_datos=Intersect. Data input
Intersecten_con=intersect with
Intervalo=Interval width\:
Intervalos=Intervals
Intervalos_equidistantes=Equality intervals
Intervalos_por_rupturas_naturales=Intervals by natural breaks.
Introduccion_de_datos=Data entry
Introducir_valores_desplazamiento=Offset values
Introductory_text_1=This wizard will help you create a new topoloy.
Introductory_text_2=A topology is a model of relative spatial relations between features in one or more layers. It includes relations such as "touches", "overlaps"; "contains", etc. Topology is of critical importance for error checking and quality control.
Introductory_text_3=For example, boundaries of residential plots may not overlap each other and must be closed.
Invalid_width=Invalid width.
Italic=Italic
Izquierda=Left
Izquierdo=Left
JTSVALID=All geometries of A must pass JTS validation
JoinCADTool.end=E
Join_parameters_are_incomplete=Join parameters are incomplete.
Juntar=Merge
Juntar._Introduccion_de_datos=Merge. Data input
KML=Keyhole Markup Language (KML)...
KeyMapping=Key mapping
KeyMapping=Key mapping
KeyMapping.Caracter_no_valido=Invalid character
Kilometros=Kilometres
Krovak=Krovak
LAGRANGE_CURVE=Lagrange curve
LARGERTHANCLUSTERTOL=All geometries must be larger than the cluster tolerance
LAYER=Layer
LINE=LINE
LINEMUSTNOTHAVEDANGLES=All line geometries of A must be free of dangling nodes
LINEMUSTNOTHAVEPSEUDONODES=No line geometry of A may contain any pseudo nodes
LINENOTSELFINTERSECT=No line of A may self-intersect
LINKS_SPATIAL_ADJUST=Error vectors
LYRMUSTBECONTAINED=All geometries of A must be contained in geometries of B
LYRMUSTBECOVERED=All geometries of A must be covered by geometries of B
LYRMUSTBECOVEREDBYLAYER=Each geometry ofA must be covered by one or more of B
LYRMUSTBEEQUAL=Each geometry of A must match an identical geometry of B
LYRMUSTCONTAINS=Each geometry of A must contain at least one geometry of B
LYRMUSTCOVERS=Each geometry of A must cover at least one geometry of B
LYRMUSTCROSSWITH=Each geometry of A must cross at least one geometry of B
LYRMUSTDISJOINTS=All geometries of A must be disjoint from all geometries of B
LYRMUSTNOTHAVEDUPLICATES=Layer A must not contain any duplicate geometries
LYRMUSTTOUCH=Each geometry of A must touch at least one geometry of B
Label_Duration=Duration
Label_Mode=Mode
Label_properties=Label properties
Laborde_Madagascar=Laborde Madagascar
LadoVentana=Window side
Lambert_Azimuthal_Equal_Area=Lambert Azimuthal Equal Area
Lambert_Conformal_Conic=Lambert Conformal Conic
Lambert_Conformal_Conic_1SP=Lambert Conformal Conic 1SP
Lambert_Conformal_Conic_2SP=Lambert Conformal Conic 2SP
Lambert_Conformal_Conic_2SP_Belgium=Lambert Conformal Conic 2SP Belgium
Lambert_Conic_Near_Conformal=Lambert Conic Near Conformal
Las_traducciones_no_pudieron_ser_cargadas=Translations could not be loaded.
Latitude=Latitude\:
Latitude_Of_1st_Point=Latitude of first point
Latitude_Of_2nd_Point=Latitude of second point
Launcher.Dependencia_no_resuelta_en_plugin=Unsatisfied plugin dependency
Launcher.Dos_skin_extension=Two skin-extension.
Launcher.Error_con_las_librerias_del_plugin=Plugin library error
Launcher.Error_instanciando_la_extension=Cannot instantiate extension
Launcher.Error_localizando_la_clase_de_la_extension=Cannot locate extension class
Launcher.Hay_dependencias_circulares=Plugin dependencies involved in circle
Launcher.Ignorando_el_directorio=Ignoring the directory
Launcher.No_se_encontro_la_clase_de_la_extension=Cannot find extension class
Launcher.No_se_encontro_la_clase_mdi_manager=Cannot find mdi manager class
Launcher.No_se_pudo_acceder_a_la_clase_mdi_manager=Cannot access mdi manager
Launcher.No_se_pudo_guardar_la_configuracion_de_andami=Cannot save Andami configuration
Launcher.No_se_pudo_instanciar_la_clase_mdi_manager=Cannot instantiate mdi manager
Launcher.No_se_puede_acceder_a=Cannot access to
Launcher.Se_produjo_un_error_guardando_la_configuracion_de_los_plugins=Cannot save plugins configuration
Launcher.Two_extensions_with_the_same_priority=Two extensions with the same priority. Only will load one.
Launcher.Two_menus_with_the_same_position=Two menus with the same position. Only will load one.
Launcher.config_mal_formado=. Malformed 'config.xml'
Launcher.config_no_encontrado='config.xml' not found
Launcher.error_getting_class_loader_for_status_bar_control=Error getting class loader for status bar
Launcher.labelset_class=Cannot find label set class (labelset)
Launcher.look_and_feel=Cannot set system 'look and feel'
Launcher.menu_without_position=Menu without assigned position
Layer=Layer
Layer3D=Layer3D
LayerName=Layer name
Layer_=Capa\:
Layer_1=Source layer
Layer_2=Target layer
Layer_Destinations=Destinations layer
Layer_Origins=Origins layer
Layer_Properties=Layer properties
Layer_Refresh=Layer refresh
Layer_added_to_TOC=Added layer to view.
Layer_created_successfully=Layer created successfully.
Layer_from_active_view=Layer from active view
Layer_loading_order=Layer loading order
Layer_options=3D Layer options
Layer_with_buffers_created=Layer with buffers created
Layer_with_buffers_reprojected=Layer with buffers reprojected
Layer_with_influence_areas_created=Created layer with areas of influence.
Layer_with_influence_areas_reprojected=Created layer with reprojected areas of influence.
Layer_with_unsupported_geometries_type=Layer geometry type not supported.
Layers=Layers
Layers_fields_loaded_successfully=Layer attribute fields successfully loaded.
Layout_Tools_Graphics=Layout object modifiers
Layout_Tools_Insert_Cartografy=Layout cartographic objects
Layout_Tools_Insert_Simple=Layout drawing tools
Layout_Tools_View=Layout embedded data view navigation
Layout_Tools_Zooms=Layout navigation (zoom and pan)
LeftEye=Left eye
Length=Length
Leyenda=Legend
Leyenda_Por_Defecto=Default legend
Limpiando_lineas=Cleaning lines
Limpiar_antes_geometrias=Clean geometries first
Limpiar_topologicamente_la_capa_de_entrada=Clean topology of input layer.
Line=Line
LineClean=Clean
LineClean._Progress_Message=Cleaning topology of layer...
LineOrPolygonToPoints=Reduce to points
LineToPoints_layer_message=Converting lines to points...
Linea=Line
Linea_comandos=Command line
Lines=Lines
Link=Link...
Link_layer_Selection=Select error vectors layer
Load_Network=Create network...
Load_Network_From_File=Load from file...
Load_Raster_Layer=Load raster layer
Load_Red=Load file of previously calculated topology
Load_Topology=Load topology
Load_TurnCosts=Add turn costs...
Load_Vector_Layer=Load vector layer
Load_links=Load...
Load_successful=Successfully loaded.
Loads_raster_layers_in_gvSIG=Loads raster layers into active view
Loads_vector_layers_in_gvSIG=Loads vector layers into active view
Localizador=Locator
Localizador_por_atributo=Locate by attribute
Longitude=Longitude
Longitude_Of_1st_Point=Longitude of first point
Longitude_Of_2nd_Point=Longitude of second point
Los_cambios_efectuados_sobre_estos_valores_se_aplicaran_al_reiniciar_la_aplicacion=The changes made on these values will be applied when restarting the application
Loximuthal=Loximuthal
MARK_AS_EXCEPTION=Mark as excluded
MAX=MAX
MDIFrame.Error_no_capturado_por_el_usuario=User error
MDIFrame.quiere_salir=Exit gvSIG?
MDIFrame.salir=Exit
MDIManagerFactory.No_skin_extension_in_the_plugins=No skin extension in the plugins
MEAN=MEAN
MERGE_OVERLAP_AREA_FIX=Merge overlap area with one of the geometries
MERGE_OVERLAP_AREA_WITH_FIX=Merge overlap area with one of the geometries
MIN=MIN
MOSTRAR=Show\:
MULTI=MULTI
MULTIGEOMETRY=Multigeometry
MULTIPOINT=MULTIPOINT
MUSTNOTHAVEREPEATED=No geometry of A may have duplicate coordinates
Manage_Flags=Manage route...
Mapa=Map
Mapped_Position=Mapped position
Mas_100=The number of values is higher than 100, and does not provide information
MaxFeaturesEditionCache=Max features edit cache
Max_lenght_dangle_nodes=Max. length dangling nodes
Max_number_Errors_not_numeric=Please provide a numeric value for the maximum number of errors.
Maximo=Maximum
McBryde_Thomas_Flat_Polar_Quartic=McBryde Thomas Flat Polar Quartic
Media=Average
Mensaje_buffer=Computing buffers
Mensaje_clip=Clip geoprocess...
Mensaje_convexhull=Convex hull geoproces
Mensaje_difference=Difference geoprocess...
Mensaje_dissolve=Dissolve geoprocess....
Mensaje_enlace_espacial=Spatial Join geoprocess...
Mensaje_interseccion=Intersection geoprocess...
Mensaje_juntar=Merge geoprocess...
Mensaje_primera_pasada_union=Computing intersections...
Mensaje_procesando_buffer=Processing buffers
Mensaje_procesando_buffer2=Dissolving buffers...
Mensaje_procesando_clip_primero=Computing clip polygon...
Mensaje_procesando_clip_segundo=Clipping geometries...
Mensaje_procesando_convexhull=Computing convex hull...
Mensaje_procesando_diferencia=Computing differences...
Mensaje_procesando_dissolves=Dissolving geometries...
Mensaje_procesando_enlace_espacial=Joining features...
Mensaje_procesando_interseccion=Computing intersections...
Mensaje_procesando_juntar=Merging geometries...
Mensaje_procesando_split=Splitting geometries...
Mensaje_segunda_pasada_union=Computing A-B differences...
Mensaje_split=Split geoprocess
Mensaje_tercera_pasada_union=Computing B-A differences...
Mensaje_union=Union geoprocess...
Menu_type_not_supported_=Menu type not supported
Mercator=Mercator
Mercator_1SP=Mercator 2SP
Mercator_2SP=Mercator 2SP
Message_apply_crack_process=Snapping tolerance is non-zero. Apply snapping to geometries now?
Message_cluster_tol_not_numeric=Please provide a numeric value for the cluster tolerance setting.
Message_crack_title=Confirm crack and snap tool.
Message_error_creating_topology=Error creating topology.
Message_error_delete_cluster_rule=Every layer that is part of a topology must have a cluster tolerance setting.
Message_error_in_data_input=Invalid input data.
Message_error_loading_topology=Error loading topology.
Message_error_select_rule=Please select a rule.
Message_layer_already_in_topology=Layer already part of topology.
Message_max_number_of_errors=Please provide a valid maximum error number.
Message_no_layers_selected=Please select at least one layer to create a new topology.
Message_not_selected_topology_file=Please select a topology file.
Message_rule_already_in_topology=Such a rule is already part of the topology.
Message_rule_definition=Invalid rule definition.
Message_rule_not_allowed=Rule cannot be added to topology. Please revise your settings.
Message_topology_layers=Topology must include at least one layer.
Message_topology_name_cluster=Please provide a name and cluster tolerance setting for the topology.
Messages._no_se_encontro_la_traduccion_para=Cannot find translation for
Messages.no_se_encontro_la_traduccion_para=It hasn't been found the translation for
Metodo_Douglas_Peucker=Douglas-Peucker method
Metodo_topology_preserving=Preserve topology
Metros=Metres
Milimetros=Millimetres
Millas=Miles
Millas_Nauticas=Nautical miles
Miller_Cylindrical=Miller Cylindrical
Minimo=Minimum
Minimum_spanning_tree=Minimum spanning tree...
Modelizador=Process flow modeller
Modified_project_=Modified project\:
Modo_de_Proyeccion=Projection Mode
Modo_ventana=Window mode
Mollweide=Mollweide
Monitor=Monitor
More_control_points_needed_for_the_current_transform=Selected type of transformation requires additional control points.
Mostrar_Contorno=Show outline
Mostrar_siempre=Always show
Move_above_layer=Move above
Move_below_layer=Move below
Move_from_view=Move points from view
Mover_geo=Move georeferenced image
Muestra_atributos=Show attribute table of active layer
Muestra_los_atributos_de_las_capas_seleccionadas=Show selected layers attributes
Muestra_los_elementos_de_la_capa_usando_una_gama_de_colores_en_funcion_del_valor_de_un_determinado_campo_de_atributos=Stretch a colour ramp over the values of a field
Muestra_todos_los_elementos_de_una_capa_usando_el_mismo_simbolo=Draw all features using the same symbol.
Muestra_todos_s_elementos_de_una_capa_usando_el_mismo_simbolo=Draw all features using the same symbol
MultiLineStringPropertyType=Multiline
MultiPoint=Multipoint
MultiPointPropertyType=Multipoint
MultiPolygonPropertyType=Multipoligon
Multi_layer_selection_applied_for_influence_area=Multilayer selection applied to buffer zones.
MultipointCADTool.end=E
Multipoints=Multipoints
Must_select_a_rule_to_correct=Please select a rule for which to fix errors (not "All rules").
NADGR=
NATURAL_CUBIC_SPLINE=Natural cubic spline
NO=No
NOT_FOUND_GEOMETRIES=No features found.
NOT_VALIDATED_STATUS=Not yet validated.
NURB_SPLINE=Non-uniform rational B-spline (NURBS)
N_points=Num points
Name=Name
Name_of_the_new_layer=Name of new layer
Near_Sided_Perspective=Near-sided perspective
Network=Network
New=Field=New Field
New_Zealand_Map_Grid=New Zealand Map Grid
New_features=New features
New_field=New field
New_field_name_proposed__=Proposed new field name\:
New_turncost=New turn cost
Next=Next
Nivel_de_detalle=Level of detail
Nivel_de_extrusion=Extrusion level
Nivel_de_extrusi\u00c3\u00b3n=
Nivel_de_extrusi\u00f3n=Extrusion level
Nivel_de_transparencia=Transparency level
No=No
No.hay.lista.de.idiomas.preferidos.quiza.olvido.inicializar.clase=There is no list of favorite languages probably you forgot initialice the class
No_Shape=This Layer is not Shape type
No_available=Service not available
No_de_intervalos=Number of intervals\:
No_extension_associated_with_this_event_=No extension associated with this event
No_ha_sido_posible_realizar_la_operacion=Unable to perform operation.
No_hay_lista_de_idiomas_preferidos_quiza_olvido_inicializar_clase=There is no preferred languages list. Maybe the 'Messages' class was not initiated.
No_mostrar=Do not show this layer if the view scale
No_mostrar_la_capa_cuando_la_escala=Do not show this layer if the view scale
No_reconocido=Not recognized
No_se_encontro_la_extension_especificada_en_el_parametro_exclusiveUI=It was not found the specified extension in the parameter 'exclusiveUI'\:
No_se_encontro_la_traduccion_para=Cannot find translation for
No_se_pudo_obtener_la_tabla_de_la_capa=It was not possible to retrieve from the layer
No_usar_buffer_redondeado=Rectangle end cap
No_vector_layer_can_be_save_changes=There is no vectorial layer in the view which can be saved
Nombre=Name
Nombre_que_se_le_dara_al_zoom=Name for the zoom
Nombres=Names
None=None
Normal_direction=Normal direction
Normalizating=Normalizing ...
North=N
North_plane=This tool is not available in plane view
Not_possible_generate_unique_field_name=It is not possible to generate a unique field name
Nueva_tabla=New table
Nuevo_conjunto=New set
Num_intervalos=Intervals right of "0"\:
Number_of_geometries_created_successfully=Number of geometries read successfully
Number_of_geometries_that_couldnt_be_created=Number of geometries that could not be created
Number_of_geometries_to_create=Number of geometries to create
Number_of_lines=Number of lines
Number_of_points=Number of points
Number_of_polygons=Number of polygons
Numero_anillos_concentricos=Number of radial buffers
Numero_de_elementos_seleccionados=Number of selected features
Numero_de_segmentos_por_cuadrante=Number of segments for a quadrant
N\u00fam_intervalos=Number of Intervals
ODMatrix=Origin-destination matrix...
OK=Ok
Objeto_3D=3D object
Objeto_3D_GIS=3D GIS Object
Objeto_3D_GIS_Vectorial=3D Vectorial GIS Object
Oblique_Mercator=Oblique Mercator
Oblique_Stereographic=Oblique Stereographic
Obtener_mas_proximo=Use nearest geometry
Offset=Offset
Ok=Ok
On_the_top=On the top
Ongoing_process_please_wait=Ongoing process, please wait...
Only_one_elevation_messg=A elevation layer already exists in View3D
Only_one_elevation_title=Elevation Layer information
Opaco=Opaque
Opciones=Options
Opciones_de_elevaci\u00c3\u00b3n=
Opciones_de_elevaci\u00f3n=Elevation options
Opciones_de_imagen=Image options
Opciones_de_objeto=Object options
Open=Open
Operacion_de_overlay=Overlay operation
Operaciones_adicionales=Additional operations
Operation_not_initialized=Operation not initialized
Optional_layers_fields_loaded_successfully=Optional layer fields successfully loaded.
Options=Options
Order=Order
Origen_de_Datos=Datasource\:
Origen_de_datos=Datasource
Origin_point=Origin point
Orthographic=Orthographic
Other_Layers_=Other layers\:
Otros=Others
Output_layer=Output layer
Outside=Outside
Outside_and_inside=Outside and inside
Over_Raster_Layers=Over raster layers
Over_Vector_Layers=Over vector layers
Overlay=Overlay
Overlay_Desc=Geoprocesses that extract new information from the overlay of two layers.
Owner=Owner\:
PAN_TO=Pan to feature
PDF_format=Link to PDF files
PERIMETER=Perimeter
POINT=POINT
POINTSMUSTNOTOVERLAP=No point of A may coincide with another point of A
POLYGON=POLYGON
POLYGONMUSTNOTOVERLAP=No polygon of A may overlap another polygon of A
POLYGONMUSTNOTOVERLAPWITH=No polygon of A may overlap a polygon of B
POLYGONMUSTNOTSELFINTERSECT=No polygon of A may contain a self-intersection
POLYGONSMUSTNOTHAVEGAPS=There must not be any gaps between polygons of A
PROJECTIVE_TRANSFORM=Projective transformation
Pagina=Page
Pan_Navigation=Pan
Parameters=Parameters
Parametros=Parameters
Parametros_De_Entrada_Para_La_Correccion=Input data for correction
Paste_above_layer=Paste above
Paste_below_layer=Paste below
Path=Path
Path_where_create_the_new_layer_files=Directory in which to save new layer files
Pegado_sobre_el_terreno=Stuck in terrain
Percent=Percent
Percent_of_load=Percent loaded
Perimeter=Perimeter
Perimetro=Perimeter
Permite_etiquetar_los_elementos_del_mapa_con_el_valor_de_un_determinado_campo=Labels each feature with the value of a selected attribute table field
Personalizado=Custom
Photometric_=Photometric\:
Pies=Feet
Pixel_Point=Pixel location
Plain=Regular
Plane_coordinates=Planar coordinates
Please_enter_a_valid_number=Please, enter a valid number.
Please_enter_max_cost_MST=Maximum cost for calculating Minimum Spanning Tree
Please_select_a_valid_file=Please, select a valid file.
PluginClassLoader.Dos_clases_con_el_mismo_nombre_en_el_plugin=Two classes with the same name
PluginClassLoader.Error_reading_file=IO error\:
PluginServices.Bug=en el c\u00f3digo=Application bug
PluginServices.Bug\ en\ el\ c\u00f3digo=Application bug
PluginServices.Bug_en_el_codigo=Bug
PluginServices.Error=grave de la aplicaci\u00f3n. Es conveniente que salgas de la aplicaci\u00f3n=Application error. It's strongly recommended to close the application.
PluginServices.Error\ grave\ de\ la\ aplicaci\u00c3\u00b3n.\ \ \n\ Es\ conveniente\ que\ salgas\ de\ la\ aplicaci\u00c3\u00b3n=
PluginServices.Error\ grave\ de\ la\ aplicaci\u00c3\u00b3n.\n\ Es\ conveniente\ que\ salgas\ de\ la\ aplicaci\u00c3\u00b3n=
PluginServices.Error\ grave\ de\ la\ aplicaci\u00f3n.\ Es\ conveniente\ que\ salgas\ de\ la\ aplicaci\u00f3n=Application error. It's strongly recommended to close the application.
PluginServices.Error\ grave\ de\ la\ aplicaci\u00f3n.\ \ \n\ Es\ conveniente\ que\ salgas\ de\ la\ aplicaci\u00f3n=Application error. It's strongly recommended to close the application.
PluginServices.Error\ grave\ de\ la\ aplicaci\u00f3n.\n\ Es\ conveniente\ que\ salgas\ de\ la\ aplicaci\u00f3n=Application error. It's strongly recommended to close the application.
PluginServices.Error_grave_de_la_aplicacion=Critical error. You better save and exit
PluginServices.Error_grave_de_la_aplicaci\u00f3n=Fatal error
PluginServices.No_se_encontro_el_recurso_de_traducciones=Cannot find resource bundle
PluginServices.No_se_encontro_la_traduccion_para=Cannot find translation for
PluginServices.No_se_pudo_poner_el_reloj_de_arena=Cannot set hour glass
PluginServices.No_se_pudo_restaurar_el_cursor_del_raton=Cannot restore cursor
PluginServices.Procesando=Processing...
Point=Point
PointPropertyType=Point
Point\ Shape\ Files=
Points=Points
PointsToLineOrPolygon=Points to line or polygon
Points_to_line=Points to line
Points_to_polygon=Points to polygon
Polar_Stereographic=Polar Stereographic
Poly_To_Lines=Reduce to lines
Polyconic=Polyconic
Polygon=Polygon
PolygonBuild._Progress_Message=Building polygon topology...
PolygonCADTool.circumscribed=C
PolygonCADTool.into_circle=I
PolygonPropertyType=Polygon property type
PolygonToLines=Convert polygons to lines
Polygons=Polygons
PolylineCADTool.arc=A
PolylineCADTool.close_polyline=C
PolylineCADTool.end=E
PolylineCADTool.line=L
Por_favor_active_el_tema=Please activate the layer
Por_favor_active_la_capa=Please activate the layer
Posicion_origen=Origin position
PowerWall=PowerWall
Preferences=Preferences
Preferencias=Preferences
Preparar_pagina=Page setup
Previsualizacion=Preview
Previsualizacion_de_simbolo=Symbol preview
Print=Print...
Procesando_linea=Building network\:
Process_canceled=Process canceled
Process_canceled_=Process cancelled.
Process_cancelled=Process cancelled.
Process_failed=Process failed
Process_finished=Process finished
Process_finished_successfully=Process successfully finished
Process_finished_wont_be_cancelled=Process has already finished. Will not be cancelled.
Process_type=Mode of operation\:
Progressive_=Progressive\:
Propiedades_3D=3D Properties
Propiedades_de_la_Capa=Properties of the layer
Propiedades_del_Tema=Layer properties
Propiedades_escala_grafica=Scale bar properties
Propiedades_texto=Text properties
Proximidad=Proximity
Proximidad_Desc=Geoprocesses that make proximity analisis.
Proyeccion_Actual=Source projection
Proyeccion_Destino=Target projection
Proyecciones=Projections
Proyection_Select=Type\:
Pulgadas=Inches
QuadBuffer=Quad buffer
Quartic_Authalic=Quartic Authalic
Quick_Print=Quick Print
Quitar=Remove
Quitar_Todos=Remove all
Quitar_capa=Remove layer
Quitar_todos=Remove all
REMOVE_OVERSHOOT_FIX=Delete overshoot
REMOVE_PSEUDONODE_FIX=Delete pseudo node
REMOVE_REPEATED_COORDS_FIX=Delete duplicate coordinates
RGB=RGB
RMS=RMS
RUBBER_SHEET_TIN_LAYER=Triangulation of control points
RUBBER_SHEET_TRANSFORM=Rubber-sheet transformation
R_format=R format (only cost in secs). Use A <- matrix(scan('matrix.dat', n = 200*2000), 200, 2000, byrow = TRUE)
Radius=Radius
Rango_de_escalas=Scale range
Rango_maximo=Maximum range
Rango_minimo=Minimu range
Raster=Raster
Raster_Layers_=Raster layers\:
Raster_layer=Rasterize layer
Rasterfiles=Rasterfiles
Rasterize_layer_question=Do you want to rasterize Layer (Yes/No)?
RealityCenter=Reality center
Recortar=Clip
Recortar._Introduccion_de_datos=Clip. Data input
RectangleCADTool.square=S
Recuperar_leyenda=Load legend
Recuperar_y_eliminar_otros_zoom=Restore and delete other zooms
Recursos=Disponibles=Available Resources
Recursos\ Disponibles=Available resources
Refresh_automaticaly=Refresh view automatically
Reload=Reload
Remove=Remove
RemoveEnds=Remove ends
Remove_All=Delete all
Remove_Lyr=Delete layer
Remove_Lyr_WARNING1=This layer is part of the following rules\:
Remove_Lyr_WARNING2=Continue and discard all associated topological information, including errors?
Remove_Rule=Delete
Remove_action=Remove action
Removed_layer_with_influence_areas_to_TOC=Removed layer with buffer zones from TOC.
Reproyeccion._Introduccion_de_datos=Reproject. Data input.
Reproyectar=Reproject
Reset_View=Reset view
Resolucion=Resolution
Resource_was_not_saved=Resource was not saved
Resultados=Display results
Return_to_current_project=Return to current project
Reverse_direction=Inverse direction
RightEye=Right eye
Robinson=Robinson
Rotation=Rotation\:
Rotation_degreesX=Rotation (degrees)X\:
Rotation_degreesY=Rotation (degrees)Y\:
Rotation_degreesZ=Rotation (degrees)Z\:
Round=Rounded
Route_report=Route report
Rule=Rule
Rule_type=Rule
Rules=Rules
Rules_not_registered=No rules registered.
Runtime_exception_refreshing_the_main_frame_by_a_Swing_thread=Program exception (fatal error) encountered while calling Java Swing thread to refresh main user interface frame.
Ruta_borrada_o_inexistente=Route deleted or not yet computed.
Ruta_manual=Insert path
Ruta_no_encontrada=Route not found.
SELECCIONAR_CURVA=Smoothing settings
SI=Yes
SIMILAR_TRANSFORM=Similarity transformation
SLD_grammar=SLD grammar
SPATIAL_ADJUST=Spatial adjustment of vector layer
SPATIAL_ADJUST_SESSION=Spatial adjustment session
SPLIT_GEOMETRY_TOOL_NAME=Split geometry
SPLIT_SELFINTERSECTING_FIX=Split self-intersecting line
SPLIT_SELFINTERSECTING_POLYGON_FIX=Split self-intersecting polygon
SQL_query=SQL query
STDEV=STDEV
SUBSTRACT_OVERLAP_AREA_FIX=Delete overlap area from both polygons
SUBSTRACT_OVERLAP_AREA_WITH_FIX=Delete overlap area from both polygons
SUM=SUM
SVG_format=Link to SVG files
Salir=Exit
Sample=Sample
Save_Topology=Save topology
Save_TurnCosts=Save turn costs...
Save_the_selected_resources_and_close_current_project=Save selected resources and close current project
ScaleCADTool.factor=F
ScaleCADTool.reference=R
Scripting=Scripting
Se_han_encontrado_capas_erroneas_en=Found wrong layers
Se_superponen_a=are on top of
Se_va_a_tener_en_cuenta_para_borrar_los_registros_desde=... delete registers from
Sean_disjuntos_a=are disjoint from
Sean_iguales_a=are the same as
Second_point_coordinates=Second point coordinates
Seleccion_por_capa=Spatial selection...
Seleccion_por_tema=Selection by Layer
Seleccionar=Select...
Seleccionar_Directorio=Path with layers...
Seleccionar_capa_con_puntos_de_parada=Convert point layer to stops
Seleccionar_de_las_capas_activas_los_elementos_que=Select features from active layers that
Seleccionar_del_conjunto=Select from set
Seleccionar_fichero=Select file
Seleccione_un_formato_para_guardar_la_ruta=Choose format for saving most recent route
Seleccione_un_formato_para_guardar_los_flags=Choose format for saving stops\:
Seleccione_una_capa_de_puntos_para_crear_paradas=Choose point layer to convert to stops.
Select_Color=Select color
Select_all=Select all
Select_layer=Select layer
Select_layers_and_process=Select layers and options
Select_link_layer=Select layer with error vectors\:
Select_resources_to_save_before_closing_current_project=Select resources to save before closing current project
Select_the_annotation_layer_to_store_the_labels_=Select the annotation layer to store the labels\:
Select_the_path=Select path
Selected=Selected
Selection_by_buffer_process=Buffer zone selection tool
Selection_process_finished_succesfully=Selection process finished successfully.
Selection_restored=Selection restored.
Service_Area=Service area...
Servidor=Server
Set_labeling_expression=Set labeling expression
Set_target_layer=Set target layer
Shalom=
Shape_Type=Geometry type
Shape_file=Shapefile
Shapefile=Shapefile
Shapefiles=Shapefiles
Shortest_Path=Shortest path
Show=Show
Show\ Errors=Show errors
Show_grid=Show grid
Show_in_map=Show on map
Shows_HTML_or_text_files_in_gvSIG=Use internal viewer for HTML and text files
Shows_HTML_or_text_files_inside_gvSIG=Use internal viewer for HTML and text files
Shows_PDF_files_in_gvSIG=Use internal viewer for PDF files
Shows_SVG_files_in_gvSIG=Use internal viewer for SVG files
Shows_image_files_in_gvSIG=Use internal viewer for image files
Side=Side
Siguiente=Next
Simbolo=Symbol
Simbolo_Unico=Unique symbol
Simbolo_unico=Single symbol
Simbologia=Symbols
Sincronizar_camaras=Synchronize cameras
SingleLabelingTool=Single Labeling Tool
Single_labeling=Single labeling
Sinusoidal=Sinusoidal
SistCoor_Geografico2D=Geographic 2D
SistCoor_Parametro=Parameter
SistCoor_Proyactado=Projected
SistCoor_Proyeccion=Projection
SistCoor_Unidades=Units
SistCoor_Valor=Value
SistCoor_cbToolTip=Select an option
SistCoor_titmarco=Coordinate system
Size=Size
SmartOrderManager=Smart order
Smooth_Geometry=Smooth
Smooth_Lines=Smooth lines
Snapping=Snapping
Sobreescribir_fichero=Overwrite file
Sobreescribir_fichero_Pregunta_1=The selected file already exists
Sobreescribir_fichero_Pregunta_2=Do you want to overwrite it?
Solo_disolver_adyacentes=Only dissolve adjacents.
Solo_para_capas_vectoriales=Only for vector layers
Source_layer=Source layer
Source_table_=Name\:
Source_table_options=Join new fields to table\:
Source_x=x0
Source_y=y0
South=S
Spatial_Adjust=Transform
Spherical=Spherical
SplashWindow.Iniciando=Starting...
SplashWindow.configuring_proxy=Configuring proxy...
SplashWindow.initializing_extensions=Initializing extensions...
SplashWindow.installing_extensions_controls=Installing extension controls...
SplashWindow.installing_extensions_labels=Installing extension labels...
SplashWindow.installing_extensions_menu=Installing extensions menu...
SplashWindow.installing_extensions_menus=Installing extension menus...
SplashWindow.loading_plugin_settings=Loading plugin settings...
SplashWindow.looking_for_a_skin=Checking for GUI skin...
SplashWindow.looking_for_updates=Looking for updates...
SplashWindow.post_initializing_extensions=Post-initializing extensions...
SplashWindow.preparing_workbench=Preparing workbench...
SplashWindow.reading_plugins_config.xml=Reading plugins XML config file...
SplashWindow.setting_up_applications_name_and_icons=Setting up application name and icons...
SplashWindow.setting_up_class_loaders=Setting up class loaders...
SplashWindow.setting_up_master_extension=Setting up master extension...
SplashWindow.starting_plugin_internationalization_system=Starting internationalization system...
SplineCADTool.close=C
SplineCADTool.end=E
Spline_=SPLINE
SplitGeometryCADTool.end=E
SplitLines._Introduccion_de_datos=Split lines. Data introduction
Start_from=Depart from
Starting_selection_of_layer=Initializing layer selection...
Starting_selection_process=Initializing selection process...
Starting_the_layer_in_edition_mode=Start editing the layer
Statistics__Error_accessing_the_data=Statistics\: Data access error.
Statistics__Selected_field_is_not_numeric=Statistics\: Selected field is not numeric.
StatusBar.Aplicacion_iniciada=Application started
Statute_mile=Statute miles
Stereographic=Stereographic
Stereographic_North_Pole=Stereographic North Pole
Stereographic_South_Pole=Stereographic South Pole
Stopping_the_layer_of_edition_mode=Stop editing the layer
Style=Style
Subir_capa=Move layer up
Sum=Summatory
SummarizeForm_columna_average=Mean
SummarizeForm_columna_id=Field
SummarizeForm_columna_maximum=Maximum
SummarizeForm_columna_minimum=Minimum
SummarizeForm_columna_sd=Std. Deviation
SummarizeForm_columna_sum=Sum
SummarizeForm_columna_variance=Variance
SummarizeForm_fichero_destino=Please, choose the target file
SummarizeForm_seleccionar_operaciones=Please, choose some operations to calculate
Summarize_Error_accessing_the_table=Summarize\: Error accessing the table
Summarize_Error_calculating_the_groups=Summarize\: Error calculating the groups
Summarize_Error_saving_the_output_DBF_file=Summarize\: Error saving the output DBF
Summarize_Field_does_not_exist=Summarize\: Field does not exist
Summarize_Group_by_field_does_not_exist=Summarize\: Group by field does not exist
Summarize_Table_has_no_fields=Summarize Error\: Selected table has no fields
Summary_of_the_new_shape_with_derivative_geometries_process=Summary of "new layer from derivative geometries" process
Summary_of_the_process_of_adding_geometric_information=Summary of the "Add geometric information" process
Summary_of_the_process_of_selecting_by_buffer=Summary of "selection by buffer zone" process
Superior=Upper
Swing_Compability=Java/Swing compatibility\:
Swing_Compability_Note=Note\: Activating Java Swing compatibility will result in graphics performance loss.
Swiss_Oblique_Cylindrical=Swiss Oblique Cylindrical
Symbol=Symbol
SymmetryCADTool.no=N
SymmetryCADTool.yes=Y
S\u00edmbolo=Symbol
TEXT=TEXT
TRANSFORMATION_ERROR=Error computing transformation
Tabla=Table
Tabla_de_Atributos=Table of attributes
Tabla_de_prueba=Test table
Tablas=Tables
Table_Join=Join tables
Table_with_turn_costs=Table with turn costs
TailTrim=Clipping tail (%)
Target_annotation_layer=Target annotation layer
Target_table_=Name\:
Target_table_options=Import fields from table\:
Target_x=x1
Target_y=y1
Tema=Layer
Terminar=Finish
TextWindow@Caption=Legend
TextWindow@CloseButton=
TextWindow@Message=
TextWindow@Title=Window title
Text_Secs=Duration (secs)
The_following_resource_could_not_be_saved_=The following resource could not be saved\:
The_process_cant_be_cancelled=Operation cannot be cancelled.
The_process_cant_be_paused=Operation cannot be paused.
The_project_has_only_read_permissions=Project file opened with read-only permission.
The_project_hasnt_read_permissions=You have no read permission for the project file.
There_are_no_geometries_selected=There are no selected geometries.
Tiempo=Time
Tile=Tile
Tipo=Type
Tipo_de_intervalos=Type of intervals
Tipo_de_leyenda=Type of legend
Tipo_de_linea=Line type
Tipo_no_reconocido=Unknown data type
Tipo_pantalla=Display type
Tolerance=Tolerance
Tolerancia_fuzzy=Fuzzy tolerance
Tool_unavaliable_with_view_in_geographic_projection=This tool is not available for views using geographic (lat/long) projection systems.
Toolbars=Toolbars
Tools_Select=Tools select
Tools_Select_Advanced=Advanced selection tools
Topology=Topology
TopologyPreferencesPage=Topology
Topology_Desc=Tools for modification and repair of topological data properties.
Topology_Test=Topology test
Topology_properties=Topology properties
Topology_properties_toc=Topology properties...
Topology_rule=Topology rule\:
Topology_rules=Topology rules\:
Toquen=touch
Total_length=Total length
Trabajar_con_las_coordenadas_originales=Use exact original coordinates
Transform=Transformation\:
Transparencia=Transparency
Transparency=Transparency
Transparente=Transparent
Transverse_Mercator=Transverse Mercator
Triangulation=Triangulation
Triangulation_Test=Triangulation
Triangulo=Triangle
TurnTable=Add turn costs
Type=Type
ULX=Left X
ULY=Left Y
UNAVAILABLE_DESCRIPTION=No description available.
UNKNOWN=UNKNOWN
UPDATE=Update
URL=URL
USGS=USGS
USR=USR
US_survey_chain=US survey chains
US_survey_foot=US survey feet
US_survey_link=US survey link
US_survey_mile=US survey miles
Umbral=Threshold
Un_Layer=Select at least one layer
Unable_to_find_icon=Unable to find icon
Uncheck_New_Field_Option_if_you_want_to_update_an_existing_field=Uncheck "New Field" option if you want to update an existing field
Undefined_layer=
Under_Raster_Layers=Under raster layers
Under_Vector_Layers=Under vector layers
Unidades=Units\:
Union=Union
Union._Introduccion_de_datos=Union. Data input
Unit=Unit
Unknown=Unknown
Unknown_layer_shape_type=Unknown layer shape type
Unknown_summarize_error=Unknown summarize error
Unnamed=Unnamed
Unnamed_new_gvsig_project_=Unnamed new gvSIG project
UnzipFile@StatusText=<%FileBeingInstalledText%>
Usar_indice_espacial=Use spatial index
Usar_los_campos_de_la_capa=Use fields from cover
Usar_solamente_los_elementos_seleccionados=Use selected features only
Use=yathis tool to create a virtual layer to perform advanced labelling, based on an existing layer. It changes the selected tool\u0092s visualization by showing one of its
fields\u0092 values.