svn-gvsig-desktop / trunk / extensions / extGraph / config / text_en_old.properties @ 28553
History | View | Annotate | Download (7.37 KB)
1 |
Aplicar_tolerancia_de_snap=Apply snap tolerance |
---|---|
2 |
Aplicar_un_CLEAN_sobre_la_capa_original=CLEAN the original layer |
3 |
Calcular_la_red_sobre_la_capa_original=Compute the net over the original layer |
4 |
center_on_flag=Center on flag |
5 |
Clean_de_lineas=Line clean |
6 |
Clear=Remove |
7 |
Clear_Barriers=Remove all barriers |
8 |
Clear_Flags=Remove all flags |
9 |
Clear_Routes=Remove all routes |
10 |
Conversion_de_datos=Data conversion |
11 |
create_topology=Create topology |
12 |
de=of |
13 |
Defines_a_dot_density_symbol_based_on_a_field_value=Defines a dot density symbol based on a value of a given field |
14 |
Error_ejecucion=Execution error |
15 |
Error_entrada_datos=Data entry error |
16 |
Error_entrada_datos=Data entry error |
17 |
Error_escritura_resultados=Error writing results |
18 |
Error_fallo_geoproceso=Error in geoprocess execution |
19 |
Error_preparar_escritura_resultados=Error preparing writing of results |
20 |
Error_seleccionar_resultado=You must select a result file layer |
21 |
Especifique_fichero_shp_resultante=Specify a resulting Shape file |
22 |
Fichero_para_capa_corregida=File for corrected layer |
23 |
Generar_Red==Generate topology network |
24 |
Limpiando_lineas=Cleaning lines |
25 |
LineClean=Topology errors correction in lineal vectorial layer. |
26 |
LineClean._Progress_Message=Cleaning topology of layer... |
27 |
Generando_red_a_partir_de_capa_lineal=Create network from layer of lines |
28 |
Procesando_linea=Building network |
29 |
Ruta_borrada_o_inexistente=Route deleted or inexisting |
30 |
Ruta_no_encontrada=Route not found |
31 |
Seleccionar_capa_con_puntos_de_parada=Creating flags from a point layer |
32 |
Seleccione_una_capa_de_puntos_para_crear_paradas=Choose a point layer whose features will be converted in flags |
33 |
Seleccione_un_formato_para_guardar_la_ruta=Choose a format to save the lastest route. |
34 |
Seleccione_un_formato_para_guardar_los_flags=Choose a format to save flags. |
35 |
Trabajar_con_las_coordenadas_originales=Work with original coordinates |
36 |
angle=Angle |
37 |
based_upon_the_road_type=Based upon the road type |
38 |
cannot_apply_to_a_non_polygon_layer=Cannot apply to a non polygon layer |
39 |
change=Change |
40 |
character_marker=Character marker |
41 |
character_marker_symbol=Character marker |
42 |
choose_marker=Choose marker |
43 |
closest_facility=Closest facility |
44 |
closest_facility_instructions=Instructions |
45 |
closest_facility_solution=Solution |
46 |
closest_facility_solve=<html><b>Solve</b></html> |
47 |
color=Color |
48 |
confirmation_overwrite=Confirmation |
49 |
cost=Cost |
50 |
cost_facility_units=<units> |
51 |
cost_field=Cost field |
52 |
cost_field_text=<html>Explicaci\u00F3n cost</html> |
53 |
cost_from_a_table_field=Compute cost from a table\u0092s field |
54 |
cost_units=Cost units |
55 |
cost_units_text=<html>Explicaci\u00F3n cost units</html> |
56 |
could_not_find_symbol_directory=Unable to locate the symbol\u0092s library\u0092s source folder |
57 |
could_not_setup_legend=Could not setup legend. Please check values. |
58 |
Create_Network=Create topology network |
59 |
create_network=Create Network |
60 |
criterium=Criterium |
61 |
densities=Densities |
62 |
digitized_direction=Same digitized direction |
63 |
digitizedDirection=Digitized direction: |
64 |
doesnt_exist=doesn't exist |
65 |
done=Done |
66 |
dot_density=Dot density |
67 |
dot_size=Dot size |
68 |
dot_value=Dot value |
69 |
draw_route=Draw the route |
70 |
enable=Enable |
71 |
error_message=Error |
72 |
event=Event |
73 |
events=Events |
74 |
facilities=Facilities |
75 |
facilities_loaded_in=Facilities loaded in |
76 |
facility=Facility |
77 |
feet=Feet |
78 |
field_configuration=Field configuration |
79 |
fill_color=Fill color |
80 |
fill_color=Fill color |
81 |
fill_properties=Fill properties |
82 |
flag_amount=Flag amount |
83 |
grid=Grid |
84 |
high=High |
85 |
hours=Hours |
86 |
inches=Inches |
87 |
invalid_layer=Invalid layer |
88 |
la_capa_no_tiene_red_asociada= |
89 |
labelling_field=Labelling field |
90 |
layers=Layers |
91 |
length_field_text=<html>Explicaci\u00F3n campo longitud</html> |
92 |
line_symbols=Line Symbols |
93 |
Load_Network=Load Network |
94 |
Load_Red=Load default network |
95 |
Load_Network_From_File=Load network from file... |
96 |
load_events=Load events |
97 |
load_stages=Load stages |
98 |
loading_facilities=Loading facilities |
99 |
low=Low |
100 |
Manage_Flags=Manage Flags (and Velocities) |
101 |
marker_fill=Marker fill |
102 |
max_cost_limit=<html><p>Maximum limit</p><p align=\"center\">of cost:</p></html> |
103 |
max_facilities_number_higher_zero=The maximum number of facilities must be higher than zero |
104 |
medium=Medium |
105 |
meters=Meters |
106 |
miles=Miles |
107 |
millimeters=Millimeters |
108 |
minutes=Minutes |
109 |
monetary=Monetary |
110 |
nautic_miles=Nautic miles |
111 |
net_analyst=Net Analyst |
112 |
Network=Network |
113 |
new_flag=New flag |
114 |
no_events_network=There is no events in the network |
115 |
no_event_selected=There is no a selected event |
116 |
no_facilities_layer_selected=There is no a facilities layer selected |
117 |
no_network_layer=Network layer not found |
118 |
number_of_facilities_to_search=<html><p>Number of facilities</p><p align=\"center\">to search:</p></html> |
119 |
offset=Offset |
120 |
only_points_in_file=The file should contain only points |
121 |
only_use_the_selected_points=<html><p>Only use the</p><p>selected points</p></html> |
122 |
options=Options |
123 |
out_of_the_network=out of the network |
124 |
outline=Outline |
125 |
outline_color=Outline color |
126 |
outline_width=Outline width |
127 |
overwrite_selected_file_confirmation=Selected file already exists. Do you want to overwrite it? |
128 |
point_symbols=Point symbols |
129 |
polygon_symbols=Polygon symbols |
130 |
preview=Preview |
131 |
properties=Properties |
132 |
random=Random |
133 |
rejected_facility_out_of_network=rejected facility cause it is out of network |
134 |
rejected_facilities_out_of_network=rejected facilities cause they are out of network |
135 |
remove_event=Remove event |
136 |
reset=Reset |
137 |
reverseDigitizedDirection=Reverse digitized direction: |
138 |
route_control_panel=Route control panel |
139 |
route_from_the_event=<html><p>Route from</p><p>the event</p></html> |
140 |
route_to_the_event=<html>Route to</p><p>the event</html> |
141 |
save=Save |
142 |
save_error=Error saving |
143 |
save_events=Save events |
144 |
save_net_file_in=Save .net file: |
145 |
save_route=Save route |
146 |
save_stages=Save stages |
147 |
seconds=Seconds |
148 |
select_length_field=Select length field |
149 |
select_route_show_instructions=Select a route to show its instructions |
150 |
select_route_to_draw=Select the route to be drawn in the map |
151 |
select_route_to_zoom=Select a route to zoom it |
152 |
select_sense_field=Select sense field |
153 |
select_street_route_field_name= |
154 |
select_type_field=Select type field |
155 |
sense_field_text=<html>For example: FT -> same as digitized direction, TF-> reverse</html> |
156 |
separation=Separation |
157 |
shape_type_not_yet_supported=Shape type not yet supported |
158 |
Shortest_Path=Shortest path |
159 |
shortest_path_not_found=Shortest path not found |
160 |
shp_files=SHP files |
161 |
simple_fill=Simple fill |
162 |
size=Size |
163 |
stage=Stage |
164 |
symbol_library=Symbol library |
165 |
symbol_property_editor=Symbol property editor |
166 |
symbol_selector=Symbol selector |
167 |
table_events_column_description=Description |
168 |
table_solution_column_cost=Cost |
169 |
table_solution_column_description=Description |
170 |
table_solution_column_facilities_position=Facility position |
171 |
the_file=The file |
172 |
tolerance=Tolerance |
173 |
total_route_cost=Total route cost |
174 |
trying_to_add_a_non_TypeSymbolEditor_panel=Attempting to add a non TypeSymbolEditor panel |
175 |
two_panels_with_the_same_name=Two panels with the same name |
176 |
type=Type |
177 |
type_field_text=type text field |
178 |
units=Units |
179 |
unit_factor=Unit factor |
180 |
unknown_longitude_units=Unknown longitude units |
181 |
unknown_time_units=Unknown time units |
182 |
unknown_units=Unkown units |
183 |
use_line_length=Use line length |
184 |
use_symbol=Use symbol |
185 |
warning_message=Warning |
186 |
width=Width |
187 |
yards=Yards |
188 |
zoom_route=Zoom the route |
189 |
piloto_de_redes=network analyst |
190 |
msg_set_velocities=Please, set speeds for each type of arc (Km / hour) |
191 |
col_arc_type=Arc Type |
192 |
col_km_per_hour=Km/hour |
193 |
set_velocities=Set speeds |
194 |
Service_Area=Service Area |
195 |
Closest_Facility=Closest Facility |
196 |
ODMatrix=Origin-Destination Matrix |
197 |
Minimum_spanning_tree=Minimum Spanning Tree |
198 |
Create_TIN=Create TIN |
199 |
|