/trunk/extensions/extGraph/config/text_en_old.properties - Annotate - Application: gvSIG desktop - gvSIG

svn-gvsig-desktop / trunk / extensions / extGraph / config / text_en_old.properties @ 30840

History | View | Annotate | Download (7.28 KB)

-            fpenarrubia
+#text_en_old.properties
 angle=Angle
-            fpenarrubia
+Aplicar_tolerancia_de_snap=Apply snap tolerance
 Aplicar_un_CLEAN_sobre_la_capa_original=CLEAN the original layer
-            fpenarrubia
+based_upon_the_road_type=Based upon the road type
-            fpenarrubia
+Calcular_la_red_sobre_la_capa_original=Compute the net over the original layer
-            fpenarrubia
+cannot_apply_to_a_non_polygon_layer=Cannot apply to a non polygon layer
-            fpenarrubia
+center_on_flag=Center on flag
-            fpenarrubia
+change=Change
 character_marker=Character marker
 character_marker_symbol=Character marker
 choose_marker=Choose marker
-            fpenarrubia
+Clean_de_lineas=Line clean
 Clear=Remove
 Clear_Barriers=Remove all barriers
 Clear_Flags=Remove all flags
 Clear_Routes=Remove all routes
 closest_facility=Closest facility
-            fpenarrubia
+Closest_Facility=Closest Facility
-            fpenarrubia
+closest_facility_instructions=Instructions
 closest_facility_solution=Solution
 closest_facility_solve=<html><b>Solve</b></html>
-            fpenarrubia
+col_arc_type=Arc Type
 col_km_per_hour=Km/hour
-            fpenarrubia
+color=Color
 confirmation_overwrite=Confirmation
-            fpenarrubia
+Conversion_de_datos=Data conversion
-            fpenarrubia
+cost=Cost
 cost_facility_units=<units>
 cost_field=Cost field
 cost_field_text=<html>Explicaci\u00F3n cost</html>
 cost_from_a_table_field=Compute cost from a table\u0092s field
 cost_units=Cost units
 cost_units_text=<html>Explicaci\u00F3n cost units</html>
 could_not_find_symbol_directory=Unable to locate the symbol\u0092s library\u0092s source folder
 could_not_setup_legend=Could not setup legend. Please check values.
 create_network=Create Network
-            fpenarrubia
+Create_Network=Create topology network
 Create_TIN=Create TIN
 create_topology=Create topology
-            fpenarrubia
+criterium=Criterium
-            fpenarrubia
+de=of
 Defines_a_dot_density_symbol_based_on_a_field_value=Defines a dot density symbol based on a value of a given field
-            fpenarrubia
+densities=Densities
 digitized_direction=Same digitized direction
-            fpenarrubia
+digitizedDirection=Digitized direction\:
-            fpenarrubia
+doesnt_exist=doesn't exist
 done=Done
 dot_density=Dot density
 dot_size=Dot size
 dot_value=Dot value
 draw_route=Draw the route
 enable=Enable
-            fpenarrubia
+Error_ejecucion=Execution error
 Error_entrada_datos=Data entry error
 Error_escritura_resultados=Error writing results
 Error_fallo_geoproceso=Error in geoprocess execution
-            fpenarrubia
+error_message=Error
-            fpenarrubia
+Error_preparar_escritura_resultados=Error preparing writing of results
 Error_seleccionar_resultado=You must select a result file layer
 Especifique_fichero_shp_resultante=Specify a resulting Shape file
-            fpenarrubia
+event=Event
 events=Events
 facilities=Facilities
 facilities_loaded_in=Facilities loaded in
 facility=Facility
 feet=Feet
-            fpenarrubia
+Fichero_para_capa_corregida=File for corrected layer
-            fpenarrubia
+field_configuration=Field configuration
 fill_color=Fill color
 fill_properties=Fill properties
 flag_amount=Flag amount
-            fpenarrubia
+Generando_red_a_partir_de_capa_lineal=Create network from layer of lines
 Generar_Red=\=Generate topology network
-            fpenarrubia
+grid=Grid
 high=High
 hours=Hours
 inches=Inches
 invalid_layer=Invalid layer
 labelling_field=Labelling field
 layers=Layers
 length_field_text=<html>Explicaci\u00F3n campo longitud</html>
-            fpenarrubia
+Limpiando_lineas=Cleaning lines
-            fpenarrubia
+line_symbols=Line Symbols
-            fpenarrubia
+LineClean=Topology errors correction in lineal vectorial layer.
 LineClean._Progress_Message=Cleaning topology of layer...
 load_events=Load events
-            fpenarrubia
+Load_Network=Load Network
 Load_Network_From_File=Load network from file...
-            fpenarrubia
+Load_Red=Load default network
-            fpenarrubia
+load_stages=Load stages
 loading_facilities=Loading facilities
 low=Low
 Manage_Flags=Manage Flags (and Velocities)
 marker_fill=Marker fill
-            fpenarrubia
+max_cost_limit=<html><p>Maximum limit</p><p align\="center">of cost\:</p></html>
-            fpenarrubia
+max_facilities_number_higher_zero=The maximum number of facilities must be higher than zero
 medium=Medium
 meters=Meters
 miles=Miles
 millimeters=Millimeters
-            fpenarrubia
+Minimum_spanning_tree=Minimum Spanning Tree
-            fpenarrubia
+minutes=Minutes
 monetary=Monetary
-            fpenarrubia
+msg_set_velocities=Please, set speeds for each type of arc (Km / hour)
-            fpenarrubia
+nautic_miles=Nautic miles
 net_analyst=Net Analyst
 Network=Network
 new_flag=New flag
 no_event_selected=There is no a selected event
-            fpenarrubia
+no_events_network=There is no events in the network
-            fpenarrubia
+no_facilities_layer_selected=There is no a facilities layer selected
 no_network_layer=Network layer not found
-            fpenarrubia
+number_of_facilities_to_search=<html><p>Number of facilities</p><p align\="center">to search\:</p></html>
 ODMatrix=Origin-Destination Matrix
-            fpenarrubia
+offset=Offset
 only_points_in_file=The file should contain only points
 only_use_the_selected_points=<html><p>Only use the</p><p>selected points</p></html>
 options=Options
 out_of_the_network=out of the network
 outline=Outline
 outline_color=Outline color
 outline_width=Outline width
 overwrite_selected_file_confirmation=Selected file already exists. Do you want to overwrite it?
-            fpenarrubia
+piloto_de_redes=network analyst
-            fpenarrubia
+point_symbols=Point symbols
 polygon_symbols=Polygon symbols
 preview=Preview
-            fpenarrubia
+Procesando_linea=Building network
-            fpenarrubia
+properties=Properties
 random=Random
 rejected_facilities_out_of_network=rejected facilities cause they are out of network
-            fpenarrubia
+rejected_facility_out_of_network=rejected facility cause it is out of network
-            fpenarrubia
+remove_event=Remove event
 reset=Reset
-            fpenarrubia
+reverseDigitizedDirection=Reverse digitized direction\:
-            fpenarrubia
+route_control_panel=Route control panel
 route_from_the_event=<html><p>Route from</p><p>the event</p></html>
 route_to_the_event=<html>Route to</p><p>the event</html>
-            fpenarrubia
+Ruta_borrada_o_inexistente=Route deleted or inexisting
 Ruta_no_encontrada=Route not found
-            fpenarrubia
+save=Save
 save_error=Error saving
 save_events=Save events
-            fpenarrubia
+save_net_file_in=Save .net file\:
-            fpenarrubia
+save_route=Save route
 save_stages=Save stages
 seconds=Seconds
-            fpenarrubia
+Seleccionar_capa_con_puntos_de_parada=Creating flags from a point layer
 Seleccione_un_formato_para_guardar_la_ruta=Choose a format to save the lastest route.
 Seleccione_un_formato_para_guardar_los_flags=Choose a format to save flags.
 Seleccione_una_capa_de_puntos_para_crear_paradas=Choose a point layer whose features will be converted in flags
-            fpenarrubia
+select_length_field=Select length field
 select_route_show_instructions=Select a route to show its instructions
 select_route_to_draw=Select the route to be drawn in the map
 select_route_to_zoom=Select a route to zoom it
 select_sense_field=Select sense field
 select_type_field=Select type field
-            fpenarrubia
+sense_field_text=<html>For example\: FT -> same as digitized direction, TF-> reverse</html>
-            fpenarrubia
+separation=Separation
-            fpenarrubia
+Service_Area=Service Area
 set_velocities=Set speeds
-            fpenarrubia
+shape_type_not_yet_supported=Shape type not yet supported
 Shortest_Path=Shortest path
 shortest_path_not_found=Shortest path not found
 shp_files=SHP files
 simple_fill=Simple fill
 size=Size
 stage=Stage
 symbol_library=Symbol library
 symbol_property_editor=Symbol property editor
 symbol_selector=Symbol selector
 table_events_column_description=Description
 table_solution_column_cost=Cost
 table_solution_column_description=Description
 table_solution_column_facilities_position=Facility position
 the_file=The file
 tolerance=Tolerance
 total_route_cost=Total route cost
-            fpenarrubia
+Trabajar_con_las_coordenadas_originales=Work with original coordinates
-            fpenarrubia
+trying_to_add_a_non_TypeSymbolEditor_panel=Attempting to add a non TypeSymbolEditor panel
 two_panels_with_the_same_name=Two panels with the same name
 type=Type
 type_field_text=type text field
 unit_factor=Unit factor
-            fpenarrubia
+units=Units
-            fpenarrubia
+unknown_longitude_units=Unknown longitude units
 unknown_time_units=Unknown time units
 unknown_units=Unkown units
 use_line_length=Use line length
 use_symbol=Use symbol
 warning_message=Warning
 width=Width
 yards=Yards
 zoom_route=Zoom the route