Revision 30840 trunk/extensions/extGraph/config/text_en.properties
text_en.properties | ||
---|---|---|
1 | 1 |
#text_en.properties |
2 |
Accumulated_distance=Accumulated distance |
|
3 |
and=and |
|
2 | 4 |
angle=Angle |
3 | 5 |
Aplicar_tolerancia_de_snap=Apply snap tolerance |
4 | 6 |
Aplicar_un_CLEAN_sobre_la_capa_original=CLEAN the original layer |
7 |
Arrival_to=Arrival to |
|
8 |
Associated_layer=Associated layer |
|
5 | 9 |
based_upon_the_road_type=Based upon the road type |
10 |
by=by |
|
6 | 11 |
Calcular_la_red_sobre_la_capa_original=Compute the net over the original layer |
12 |
Calculate=Calculate |
|
13 |
Calculate_Service_Areas=Calculate Service Areas |
|
7 | 14 |
cannot_apply_to_a_non_polygon_layer=Cannot apply to a non polygon layer |
8 | 15 |
center_on_flag=Center on flag |
9 | 16 |
change=Change |
... | ... | |
19 | 26 |
col_arc_type=Arc Type |
20 | 27 |
col_km_per_hour=km/hour |
21 | 28 |
color=Color |
29 |
compact_area=Compact area |
|
30 |
connectivity=Connectivity |
|
31 |
Connectivity=Connectivity |
|
32 |
connectivity_analysis=Connectivity analysis |
|
33 |
continue_by=continue by |
|
22 | 34 |
Conversion_de_datos=Data conversion |
23 | 35 |
cost=Cost |
24 | 36 |
cost_field=Cost field |
... | ... | |
26 | 38 |
cost_from_a_table_field=Compute cost from a table\u00B4s field |
27 | 39 |
cost_units=Cost units |
28 | 40 |
cost_units_text=<html>cost units</html> |
41 |
costs=costs |
|
29 | 42 |
could_not_find_symbol_directory=Unable to locate the symbols library source folder |
30 | 43 |
could_not_setup_legend=Could not setup legend. Please check values. |
31 | 44 |
create_network=Create Network |
... | ... | |
34 | 47 |
de=of |
35 | 48 |
Defines_a_dot_density_symbol_based_on_a_field_value=Defines a dot density symbol based on a value of a given field |
36 | 49 |
densities=Densities |
50 |
digitizedDirection=Digitized direction |
|
37 | 51 |
done=Done |
38 | 52 |
dot_density=Dot density |
39 | 53 |
dot_size=Dot size |
40 | 54 |
dot_value=Dot value |
55 |
during=during |
|
41 | 56 |
enable=Enable |
42 | 57 |
Error_ejecucion=Execution error |
43 | 58 |
Error_entrada_datos=Data entry error |
... | ... | |
50 | 65 |
feet=Feet |
51 | 66 |
Fichero_para_capa_corregida=File for corrected layer |
52 | 67 |
field_configuration=Field configuration |
68 |
File_Format=File Format |
|
53 | 69 |
fill_color=Fill color |
54 | 70 |
fill_properties=Fill properties |
55 | 71 |
flag_amount=Flag amount |
72 |
follow=Follow |
|
56 | 73 |
Generando_red_a_partir_de_capa_lineal=Create network from layer of lines |
57 | 74 |
Generar_Red=\=Generate net topology |
58 | 75 |
generate_report=See the route information |
76 |
Generated_File=Generated File |
|
59 | 77 |
grid=Grid |
60 | 78 |
high=High |
61 | 79 |
hours=Hours |
... | ... | |
64 | 82 |
la_capa_no_tiene_red_asociada=The layer has no association to the net |
65 | 83 |
labelling_field=Labelling field |
66 | 84 |
layer=Layer |
85 |
Layer_Destinations=Layer Destinations |
|
86 |
Layer_Origins=Layer Origins |
|
67 | 87 |
layers=Layers |
68 | 88 |
length_field_text=<html>Length field text</html> |
69 | 89 |
Limpiando_lineas=Cleaning lines |
70 | 90 |
line_symbols=Line Symbols |
71 | 91 |
LineClean=Topology errors correction in lineal vectorial layer. |
72 | 92 |
LineClean._Progress_Message=Cleaning topology of layer... |
93 |
load_layer_nodes=Load node layer |
|
73 | 94 |
Load_Network=Load topology from previous generated net |
74 | 95 |
Load_Red=Load data from previous calculated topology |
75 | 96 |
load_stages=Load stages |
97 |
Load_TurnCosts=Load turn costs |
|
98 |
load_velocities=Load velocities |
|
76 | 99 |
low=Low |
77 | 100 |
Manage_Flags=Manage flags |
78 | 101 |
marker_fill=Marker fill |
... | ... | |
88 | 111 |
Network=Network |
89 | 112 |
new_flag=New flag |
90 | 113 |
no_se_puede_pasar_por_todas_las_paradas=Not possible to pass all the stops |
114 |
Normal_direction=Normal direction |
|
115 |
odmatrix_control_panel=Origin-Destination Matrix |
|
91 | 116 |
offset=Offset |
92 | 117 |
options=Options |
118 |
Options=Options |
|
119 |
order_stops=Order Stops |
|
120 |
Origin_point=Origin point |
|
93 | 121 |
outline=Outline |
94 | 122 |
outline_color=Outline color |
95 | 123 |
outline_width=Outline width |
124 |
Parameters=Parameters |
|
96 | 125 |
piloto_de_redes=Network pilot |
97 |
redes=Network
|
|
126 |
Please_enter_max_cost_MST=Please, input max cost to calculate Minimum Spanning Tree
|
|
98 | 127 |
point_symbols=Point symbols |
99 | 128 |
polygon_symbols=Polygon symbols |
100 | 129 |
preview=Preview |
... | ... | |
103 | 132 |
put_barrier=Put barrier |
104 | 133 |
put_flag_on_arc=Put flag on a section |
105 | 134 |
put_flag_on_node=Put flag on a node |
135 |
put_turncost=Add turn cost |
|
106 | 136 |
random=Random |
137 |
redes=Network |
|
107 | 138 |
reset=Reset |
139 |
return_to_origin=Return to origin |
|
140 |
Reverse_direction=Inverse direction |
|
108 | 141 |
route_control_panel=Route control panel |
142 |
Route_report=Route report |
|
109 | 143 |
Ruta_borrada_o_inexistente=Route deleted or inexisting |
110 | 144 |
Ruta_no_encontrada=Route not found |
111 | 145 |
save=Save |
112 | 146 |
save_error=Error saving |
113 | 147 |
save_route=Save route |
114 | 148 |
save_stages=Save stages |
149 |
Save_TurnCosts=Save turn costs |
|
150 |
save_velocities=Save velocities |
|
115 | 151 |
seconds=Seconds |
116 | 152 |
Seleccionar_capa_con_puntos_de_parada=Creating flags from a point layer |
117 | 153 |
Seleccione_un_formato_para_guardar_la_ruta=Choose a format to save the lastest route. |
... | ... | |
123 | 159 |
select_type_field=Select type field |
124 | 160 |
sense_field_text=<html>sense text field</html> |
125 | 161 |
separation=Separation |
162 |
service_area_control_panel=Service Area |
|
163 |
set_source_flag=Set source flag |
|
126 | 164 |
set_velocities=Set speeds |
127 | 165 |
shape_type_not_yet_supported=Shape type not yet supported |
128 | 166 |
Shortest_Path=Shortest path |
129 | 167 |
shortest_path_not_found=No route could be found |
130 | 168 |
shortestpath=Shortest path |
169 |
Show_in_map=Show in map |
|
131 | 170 |
simple_fill=Simple fill |
132 | 171 |
size=Size |
133 | 172 |
solucion_no_valida=solution is not valid |
134 | 173 |
stage=Stage |
174 |
Start_from=Start from |
|
135 | 175 |
symbol_library=Symbol library |
136 | 176 |
symbol_property_editor=Symbol property editor |
137 | 177 |
symbol_selector=Symbol selector |
178 |
tolerance=tolerance |
|
179 |
Tolerance=Tolerance |
|
138 | 180 |
Topology_Test=topology test |
181 |
Total_length=Total length |
|
139 | 182 |
total_route_cost=Total route cost |
140 | 183 |
Trabajar_con_las_coordenadas_originales=Work with original coordinates |
141 | 184 |
Triangulation_Test=Triangulation test |
142 | 185 |
trying_to_add_a_non_TypeSymbolEditor_panel=Attempting to add a non TypeSymbolEditor panel |
186 |
turn=turn |
|
143 | 187 |
two_panels_with_the_same_name=Two panels with the same name |
144 | 188 |
type=Type |
145 | 189 |
type_field_text=<html>type text field</html> |
... | ... | |
148 | 192 |
unknown_time_units=Unknown time units |
149 | 193 |
unknown_units=Unkown units |
150 | 194 |
use_line_length=Use line length |
195 |
Use_max_cost=Usar max cost |
|
196 |
Use_max_distance=Use max distance |
|
151 | 197 |
use_symbol=Use symbol |
152 | 198 |
width=Width |
153 | 199 |
yards=Yards |
Also available in: Unified diff