gvsig-lrs / org.gvsig.lrs / trunk / org.gvsig.lrs / org.gvsig.lrs.app / org.gvsig.lrs.app.mainplugin / src / main / resources-plugin / i18n / text_en.properties @ 47
History | View | Annotate | Download (5.43 KB)
1 |
#text_en.properties |
---|---|
2 |
|
3 |
error_creating_panel=Error creating panel |
4 |
|
5 |
# CREATE ROUTE |
6 |
length=Length |
7 |
one_field=One field |
8 |
two_fields=Two fields |
9 |
up_left=Up left |
10 |
down_left=Down left |
11 |
up_right=Up right |
12 |
down_right=Down right |
13 |
create_routes=Create Routes |
14 |
source=Source |
15 |
id_route_field=Route identifier field |
16 |
output_file=Output file |
17 |
measure_source=Measure source |
18 |
from_measure_field=From-measure or length field |
19 |
to_measure_field=To-measure field |
20 |
coordinates_priority=Coordinate priority |
21 |
measure_factor=Measure factor |
22 |
measure_offset=Measure offset |
23 |
ignore_spatial_gaps=Ignore spatial gaps |
24 |
_Browser=Browser |
25 |
_Accept=Ok |
26 |
_Cancel=Cancel |
27 |
_Close=Close |
28 |
linear_reference_system=Linear ref. |
29 |
progress=Progress |
30 |
error_getting_parameters=Error getting algorithm parameters |
31 |
need_to_select_a route_identifier_field=You need to select a route identifier field |
32 |
paratemeters=Parameters |
33 |
_LrsNeededParameterException=One or more of required parameters are empty |
34 |
need_to_fill_the_target_path=You need to fill the target file path |
35 |
need_to_select_a_length_measure_field=You need to select a length measure field |
36 |
need_to_select_a_from_measure_field=You need to select a from measure field |
37 |
need_to_select_a_to_measure_field=You need to select a to measure field |
38 |
file_already_exists_do_you_want_overwrite_it=File already exists. Do you want overwrite it? |
39 |
grouping_features=Grouping features |
40 |
at_least_one_layer_needed=At least one layer is needed |
41 |
impossible_to_find_needed_layer=Impossible to find needed layer |
42 |
error_creating_outputStore=Error creating output store |
43 |
load_layer_question=Would you like to load the generated layer? |
44 |
load_layer_question_title=Load Layer? |
45 |
|
46 |
#CALIBRATE ROUTE |
47 |
calibrate_point_layer=Calibration points layer |
48 |
id_calibration_point_route_field=Route identifier in calibration points layer |
49 |
measures_field=Measures field |
50 |
measure_calc_method=Measure calculations method |
51 |
search_radius=Search radius |
52 |
interpolate_between_calibration_points=Interpolate between calibration points |
53 |
units=Units |
54 |
extrapolate_before_calibration_points=Extrapolate before calibration points |
55 |
extrapolate_after_calibration_points=Extrapolate after calibration points |
56 |
include_all=Include all elements in output layer |
57 |
distance=Distance |
58 |
measures=Measures |
59 |
calibrate_routes=Calibrate routes |
60 |
two_or_more_layers_are_needed=Two or more layers are needed |
61 |
impossible_to_find_needed_layers=Impossible to find needed layers |
62 |
error_getting_selected_item_from_cmbInputLayer=Error getting selected item from source layer |
63 |
error_getting_selected_item_from_cmbIdRouteField=Error getting selected item from route identifier field |
64 |
need_to_select_a_source_layer=You need to select a source layer |
65 |
error_getting_selected_item_from_cmbCalibratePointLayer=Error getting selected item from calibration points layer |
66 |
need_to_select_a_calibrate_point_layer=You need to select a calibration points layer |
67 |
error_getting_selected_item_from_cmbCalibrationPointIdRouteField=Error getting selected item from route identifier in calibration points layer |
68 |
need_to_select_a_route_identifier_calibration_point_field=You need to select a route identifier field from calibration points layer |
69 |
error_getting_selected_item_from_cmbFromMeasureField=Error getting selected item from From-measure field |
70 |
need_to_select_a_from_Measure_field=You need to select a From-measure field |
71 |
calibrating_features=Calibrating features |
72 |
kilometer=kilometer |
73 |
meter=meter |
74 |
centimeter=centimeter |
75 |
millimeter=millimeter |
76 |
mile=mile |
77 |
yards=yards |
78 |
feet=feet |
79 |
inch=inch |
80 |
|
81 |
#EDIT ROUTE |
82 |
a_layer_is_needed=A layer is needed |
83 |
an_editing_layer_is_needed=An editing layer is needed |
84 |
impossible_to_find_needed_layer=Impossible to find a correct layer |
85 |
edit_route_calibration=Edit route calibration |
86 |
|
87 |
minimum=Minimum |
88 |
maximum=Maximum |
89 |
_Invert=Invert |
90 |
_Apply=Apply |
91 |
a_selectedIdRoute_is_needed=A selected route identifier is needed |
92 |
route_not_contained=Selected id route is not contained in editing layer |
93 |
error_getting_table_info=Error getting table info |
94 |
|
95 |
warnings_in_edit_route=Have been found the following warnings in the data table: |
96 |
accept_warnings_question=Are you sure you want to continue saving this data? |
97 |
warnings_dialog=Warnings Found Dialog |
98 |
more_warnings_found=...and {0} more warnings found |
99 |
warn_Not_data_found_in_table=The editing table has not data |
100 |
warn_Not_enough_data_found_in_table=The editing table has not enough data |
101 |
warn_Negative_value_at_row=A negative value has been found at row {0} |
102 |
warn_Out_of_sequence_value_at_row=Value at row {0} is out of sequence |
103 |
warn_Repeated_value_at_row=Repeated values in rows {0} and {1} |
104 |
|
105 |
|
106 |
#GENERATE DYNAMIC SEGMENTATION |
107 |
generate_dynamic_segmentation=Generate dynamic segmentation |
108 |
table=Value table |
109 |
table_id_route_field=Route identifier in value table |
110 |
landmark_field=Landmark |
111 |
final_landmark_field=Final Landmark |
112 |
value_field=Value |
113 |
a_table_is_needed=A table is needed |
114 |
error_getting_selected_item_from_cmbTable=Error getting selected item from table |
115 |
need_to_select_a_table=You need to select a table |
116 |
error_getting_selected_item_from_cmbTableIdRouteField=Error getting selected item from route identifier in value table |
117 |
error_getting_selected_item_from_cmbLandmarkField=Error getting selected item from landmark field |
118 |
need_to_select_a_landmark_field=You need to select a landmark field |
119 |
error_getting_selected_item_from_cmbFinalLandmarkField=Error getting selected item from final landmark field |
120 |
error_getting_selected_item_from_cmbValueField=Error getting selected item from value field |
121 |
need_to_select_a_value_field=You need to select a value field |
122 |
|
123 |
#SHOW MEASURES |
124 |
at_least_a_line_needed=At least a line is needed |
125 |
show_measures=Show Measures |
126 |
wiper_measures=Clean measures |
127 |
|