gvsig-vectorediting / org.gvsig.vectorediting / trunk / org.gvsig.vectorediting / org.gvsig.vectorediting.app / org.gvsig.vectorediting.app.mainplugin / src / main / resources-plugin / i18n / text_en.properties @ 3194
History | View | Annotate | Download (10 KB)
1 | 2746 | fdiaz | key_natural_cubic_splinesstart_editing = Start editing |
---|---|---|---|
2 | 98 | llmarques | end_editing = End editing |
3 | insert_point = Insert point |
||
4 | 279 | llmarques | insert_multipoint = Insert MultiPoint |
5 | 175 | llmarques | insert_line = Insert line |
6 | 179 | llmarques | insert_arc = Insert arc |
7 | 2125 | fdiaz | insert_arc_by_center = Insert arc by center |
8 | 2141 | fdiaz | insert_arc_three_points = Insert arc by three points |
9 | 98 | llmarques | insert_circle_cr=Insert circle (center & radius) |
10 | insert_circumference_cr=Insert circumference (center & radius) |
||
11 | 2868 | fdiaz | insert_circle_cd=Insert circle (center & diameter) |
12 | insert_circumference_cd=Insert circumference (center & diameter) |
||
13 | 2746 | fdiaz | insert_circle_2p = Insert circle (two point)key_natural_cubic_splines |
14 | 248 | llmarques | insert_circle_3p = Insert circle (three point) |
15 | 2109 | fdiaz | insert_circle_tantanradius = Insert circle (tan, tan, radius) |
16 | 2707 | fdiaz | insert_circumference_2p = Insert circumference (two points) |
17 | 248 | llmarques | insert_circumference_3p = Insert circumference (three points) |
18 | 2109 | fdiaz | insert_circumference_tantanradius = Insert circumference (tan, tan, radius) |
19 | 188 | llmarques | insert_ellipse = Insert ellipse |
20 | 272 | fdiaz | insert_filled_ellipse = Insert filled ellipse |
21 | 2104 | fdiaz | insert_ellipse_center_axes = Insert ellipse (center & axes) |
22 | insert_filled_ellipse_center_axes = Insert filled ellipse (center & axes) |
||
23 | 98 | llmarques | insert_polyline = Insert polyline |
24 | 101 | llmarques | insert_polygon = Insert polygon |
25 | 190 | llmarques | insert_regular_polygon = Insert regular polygon |
26 | insert_filled_regular_polygon = Insert filled regular polygon |
||
27 | 201 | llmarques | insert_rectangle = Insert rectangle |
28 | insert_filled_rectangle = Insert filled rectangle |
||
29 | 210 | llmarques | insert_spline= Insert spline curve |
30 | insert_filled_spline = Insert filled spline |
||
31 | 362 | llmarques | insert_rectangular_matrix = Rectangular matrix of geometries |
32 | insert_polar_matrix = Polar matrix of geometries |
||
33 | 98 | llmarques | modify_internal_polygon = Internal polygon |
34 | 254 | llmarques | modify_explode_geometry = Explode geometry |
35 | 258 | llmarques | modify_move = Move geometry |
36 | 260 | fdiaz | modify_rotate = Rotate geometry |
37 | 264 | llmarques | modify_duplicate = Duplicate geometry |
38 | 2723 | fdiaz | modify_divide = Divide |
39 | modify_measure = Measure |
||
40 | 264 | llmarques | modify_split_line = Split line open by a point |
41 | 325 | llmarques | modify_split = Split geometry |
42 | 265 | fdiaz | modify_scale = Scale geometry |
43 | 274 | llmarques | modify_simplify = Simplify geometry |
44 | 301 | fdiaz | insert_autopolygon = Insert autopolygon |
45 | 304 | llmarques | modify_join = Join geometries |
46 | 307 | fdiaz | modify_stretch = Stretch geometry |
47 | 329 | llmarques | modify_extend_line = Extend line to object |
48 | 2802 | fdiaz | modify_trim_lines_by_cutting_edges = Trim lines by cutting edges |
49 | modify_trim_polygons = Trim polygons by object |
||
50 | 368 | fdiaz | modify_edit_vertex = Edit vertex |
51 | 548 | llmarques | modify_convert_to_polyline= Convert to polyline |
52 | 549 | llmarques | modify_reverse_direction=Reverse direction |
53 | 2444 | fdiaz | modify_align_edges=Align edges |
54 | 2946 | fdiaz | modify_chamfer=Chamfer |
55 | 3194 | fdiaz | modify_parabolicfillet=Parabolic fillet |
56 | 368 | fdiaz | uniqueselection = Select only one geometry |
57 | selectvertex = Select a vertex |
||
58 | 526 | fdiaz | new_position = New position |
59 | 840 | fdiaz | new_position_or_z_value = New position or Z value |
60 | 368 | fdiaz | insert_vertex = Insertr vertex |
61 | remove_vertex = Remove vertex |
||
62 | 63 | fdiaz | selection=Selection |
63 | 65 | fdiaz | invalid_option=Invalid option |
64 | center=Center |
||
65 | 69 | llmarques | radius=Radius |
66 | 2868 | fdiaz | diameter=Diameter |
67 | 69 | llmarques | save_changes_performed=Save changed performed |
68 | discard= Discard |
||
69 | discard_and_loose_changes= Discard changes and loose changes |
||
70 | continue= Continue |
||
71 | 260 | fdiaz | do_not_save_yet_stay_in_editing_mode= Don't save changes and continue editing |
72 | 129 | llmarques | indicate_new_point= Indicate new point |
73 | 194 | llmarques | arc_mode = Arc mode |
74 | line_mode = Line mode |
||
75 | 80 | llmarques | select_new_tool= Select a new tool |
76 | 325 | llmarques | draw_geometry_to_interal_polygon= Select tool to draw a internal polygon |
77 | 301 | fdiaz | draw_geometry_to_autopolygon = Select tool to draw an autopolygon |
78 | 325 | llmarques | draw_geometry_to_split = Select tool to split selected geometries |
79 | 318 | fdiaz | draw_geometry_to_select_vertex = Select a polygonal tool to select vertex |
80 | 105 | llmarques | save = Save |
81 | discard = Discard |
||
82 | 260 | fdiaz | continue = Continue |
83 | 105 | llmarques | export = Export |
84 | ask_save_layer = Would you really like to save the layer |
||
85 | can_not_write_layer = There are not writer for this layer format or you don't have write permissions.\nWhat do you want to do? |
||
86 | save_changes_performed = Save changed performed |
||
87 | discard_and_loose_changes = Discard and loose changes |
||
88 | export_to_another_format = Export to another format |
||
89 | 175 | llmarques | do_not_save_yet_stay_in_editing_mode = Do not save changes and continue editing |
90 | first_point= First point |
||
91 | 179 | llmarques | second_point= Second point |
92 | start_point= Start point |
||
93 | middle_point= Middle point |
||
94 | 248 | llmarques | third_point= Third point |
95 | 188 | llmarques | end_point= End point |
96 | 260 | fdiaz | first_point_A_axis = First point of A axis |
97 | 188 | llmarques | second_point_A_axis = Second point of A axis |
98 | 190 | llmarques | length_of_B_axis= Length of B axis |
99 | 2109 | fdiaz | length_of_B_semiaxis= Length of B semiaxis |
100 | 2104 | fdiaz | point_A_axis = Punto del eje A |
101 | 190 | llmarques | inscribed = Inscribed |
102 | circumscribed = Circumscribed |
||
103 | sides_of_regular_polygon = Indicate sides of regular polygon |
||
104 | center_of_regular_polygon = Center of regular polygon |
||
105 | point_of_circle = Point of circle of polygon |
||
106 | 2102 | fdiaz | first_point_of_the_first_line = First point of the first line |
107 | second_point_of_the_first_line = Second point of the first line |
||
108 | first_point_of_the_second_line = First point of the second line |
||
109 | second_point_of_the_second_line = Second point of the second line |
||
110 | point_near_center = Point near center |
||
111 | 2109 | fdiaz | point_near_tangent_in_first_geometry = Point near tangent in first geometry |
112 | point_near_tangent_in_second_geometry = Point near tangent in second geometry |
||
113 | radius = Radius |
||
114 | 190 | llmarques | sides = Sides |
115 | 194 | llmarques | key_arc_mode = A |
116 | key_line_mode = L |
||
117 | 210 | llmarques | key_close = C |
118 | 201 | llmarques | key_finish = F |
119 | 241 | llmarques | key_inscribed = I |
120 | 260 | fdiaz | key_circumscribed = C |
121 | 437 | fdiaz | key_remove_last_point = R |
122 | remove_last_point = Remove last point |
||
123 | 210 | llmarques | close_polyline = Close polyline |
124 | close_spline = Close spline curve |
||
125 | new_point = New point |
||
126 | 254 | llmarques | new_value = New value |
127 | 263 | fdiaz | finished = finished |
128 | center_of_rotation=Center of rotation |
||
129 | 335 | fdiaz | angle_of_rotation=Angle of rotation (degree) |
130 | 265 | fdiaz | origin_point = Origin |
131 | 325 | llmarques | tolerance = Tolerance |
132 | 344 | llmarques | line_to_extend = Select line to extend |
133 | line_to_trim = Select line to trim |
||
134 | 338 | fdiaz | modify_smooth_line = Smooth line |
135 | intermediate_steps_1_9 = Intermediate steps [1,9] |
||
136 | algorithm = algorithm |
||
137 | natural_cubic_splines = Natural cubic splines |
||
138 | bezier_curves = Bezier curves |
||
139 | b_splines = B-splines |
||
140 | 2746 | fdiaz | key_natural_cubic_splines = NCS |
141 | key_bezier_curves = BC |
||
142 | key_b_splines = BS |
||
143 | 359 | llmarques | columns_number = Number of columns |
144 | rows_number = Number of rows |
||
145 | 367 | llmarques | distance_between_columns = Distance between columns |
146 | distance_between_rows = Distance between rows |
||
147 | 362 | llmarques | key_yes= Y |
148 | key_no = N |
||
149 | yes = Yes |
||
150 | no = No |
||
151 | number_of_total_elements = Number of total elements |
||
152 | rotate_elements = Rotate elements? |
||
153 | 401 | fdiaz | angle_between_elements = Angle between elements |
154 | 436 | fdiaz | modify = modify |
155 | insert = insert |
||
156 | Modify = Modify |
||
157 | 672 | jjdelcerro | Insert = Insert |
158 | 673 | jjdelcerro | _The_layer_is_reproyected_on_the_fly_Not_all_editing_tools_work_properly_When_you_finish_editing_will_only_export_the_changes_to_another_layer=The layer is reproyected on the fly.\nNot all editing tools work properly.\nWhen you finish editing will only export the changes to another layer will be allowed. |
159 | _Do_you_want_to_finish_editing_If_not_exported_the_data_the_changes_will_be_lost=Do you want to finish editing?\nIf not exported the data and finish editing, the changes will be lost. |
||
160 | _Cant_finish_editing_See_the_error_log_for_more_information=Unable to finish editing.\nSee the error log for more information |
||
161 | 911 | dmartinezizquierdo | _The_layer_can_not_be_written_When_you_finish_editing_will_only_export_the_changes_to_another_layer=The layer can not be written.\nWhen you finish editing will only export the changes to another layer will be allowed. |
162 | 1575 | jjdelcerro | remove_selected_geometries=Remove selected geometries |
163 | _Use_a_point_previously_captured=Use a point previously captured. |
||
164 | _Enter_the_coordinates_manually=Enter the coordinates manually. |
||
165 | 2125 | fdiaz | start_angle = Start angle |
166 | sweep_angle = Sweep angle |
||
167 | 2172 | fdiaz | center_point = Center point |
168 | 2212 | fdiaz | _graphic_distance = Graphic distance |
169 | 2444 | fdiaz | geometry_to_extend_to=Geometry to extend to |
170 | 2228 | fdiaz | geometry_to_trim_with=Geometry to trim with |
171 | 2289 | jolivas | shearing_point=Shearing point |
172 | 2444 | fdiaz | _dismiss=Dismiss |
173 | 2611 | jjdelcerro | _List_of_layers_to_finish_editing=List of layers to finish editing |
174 | 2445 | jolivas | _The_following_layers_dismiss_the_changes=The following layers dismiss the changes: \n |
175 | _Dismiss_information=Dismiss information |
||
176 | _finish_edition=Finish edition |
||
177 | 2444 | fdiaz | _align_edges=Align edges |
178 | _geometry_base=Geometry base |
||
179 | _geometry_to_align=Geometry to align |
||
180 | _align_mode=Align mode |
||
181 | _up=Up |
||
182 | _down=Down |
||
183 | _left=Left |
||
184 | _right=Right |
||
185 | _horizontal_centering=Horizontal |
||
186 | _vertical_centering=Vertical |
||
187 | _both_centering=Both centers |
||
188 | _short_up=U |
||
189 | _short_down=D |
||
190 | _short_left=L |
||
191 | _short_right=R |
||
192 | _short_horizontal_centering=H |
||
193 | _short_vertical_centering=V |
||
194 | _short_both_centering=C |
||
195 | _do_copy_question=Do copy? |
||
196 | _delete_original_geometries=Delete original geometries |
||
197 | _do_copy=Do copy |
||
198 | _yes=Yes |
||
199 | _no=No |
||
200 | _short_yes=Y |
||
201 | _short_no=N |
||
202 | _Modify_paste_from_clipboard=Paste from clipboard |
||
203 | _Location=Location |
||
204 | 2445 | jolivas | _Clipboard=Clipboard |
205 | 2608 | fdiaz | _Copy_alphanumeric_attributes=Copy alphanumeric attributes |
206 | 2611 | jjdelcerro | copyAlphanumericAttributes=Copy alphanumeric attributes |
207 | 2723 | fdiaz | _Dont_copy_alphanumeric_attributes=Don't copy alphanumeric attributes |
208 | 2611 | jjdelcerro | _Editing_tool_options=Editing tool options |
209 | _Vector_editing_tool_options=Vector editing tool options |
||
210 | _Activate_an_editing_tool_to_see_your_options_here=Activate an editing tool to see your options here. |
||
211 | _Options=Options |
||
212 | 2641 | jjdelcerro | _Apply=Apply |
213 | _Default_values=Default values |
||
214 | _Table=Table |
||
215 | 2723 | fdiaz | _Tool=Tool |
216 | _insertion_point=Insertion point |
||
217 | _measure=measure |
||
218 | _align=align |
||
219 | _dont_align=don't align |
||
220 | _rotate_field=rotate field |
||
221 | segments_number=segments number |
||
222 | _point_options=Point options |
||
223 | 2868 | fdiaz | _Direction=Direction |
224 | 2946 | fdiaz | equidistant_copies=Equidistant copies |
225 | _save=Save |
||
226 | 2995 | fdiaz | _export=Export |
227 | 2998 | fdiaz | _Origin_point=Origin |
228 | 2995 | fdiaz | _Key_origin_center=C |
229 | _Origin_center=Center |
||
230 | _Proportional_scale_question=Proportional scale? |
||
231 | _Proportional_scale=Proportional scale |
||
232 | _Scale_factor_or_reference_point = Scale factor or reference point |
||
233 | _Horizontal_scale_factor_or_reference_point=Horizontal scale factor or reference point |
||
234 | _Second_scale_point = Second scale point |
||
235 | 2998 | fdiaz | _Vertical_scale_factor=Vertical scale factor |
236 | 2999 | fdiaz | _Pivot_center_envelope=Envelope center |
237 | _Key_pivot_center_envelope=C |
||
238 | 3015 | fdiaz | _Pivot_centroid=Baricenter (centroid) |
239 | 2999 | fdiaz | _Key_pivot_centroid=B |
240 | 2998 | fdiaz | _Rotate_mode=Mode |
241 | _Rotate_active_angle_mode=Angle |
||
242 | _Rotate_two_points_mode=Two points |
||
243 | _Rotate_three_points_mode=Three points |
||
244 | _Key_rotate_active_angle_mode=A |
||
245 | _Key_rotate_two_points_mode=2 |
||
246 | _Key_rotate_three_points_mode=3 |
||
247 | _Pivot_point=Pivot point |
||
248 | _Angle=Angle |
||
249 | _Start_of_rotation=Start of rotation |
||
250 | 3015 | fdiaz | _End_of_rotation=End of rotation |
251 | _Separate_elements_question=The elements pivot individually? |
||
252 | _Element_rotation=Rotaci\u00f3n de elementos |
||
253 | _Individually=Individuallly |
||
254 | 3142 | fdiaz | _Together=Together |
255 | _first_point=First point |
||
256 | _Second_point=Second point |
||
257 | _First_distance=First distance |
||
258 | _Second_distance=Second distance |
||
259 | _Angle=Angle |
||
260 | _Delete_second_selected_geometry_question=Delete second selected geometry? |
||
261 | _Method=Method |
||
262 | _Distance=Distance |
||
263 | _Short_distance=D |
||
264 | _Short_angle=A |
||
265 | 3194 | fdiaz | _Delete_second_selected_geometry=Delete second selected geometry |
266 | _First_segment=First segment |
||
267 | _Second_segment=Second segment |